Publications Materials and Corrosion Protection prior to 2011

The department Materials and Corrosion Protection was formed in 2021 by merging the research groups High Temperature Materials and Corrosion. Therefore the publications are listed here according to this former division.

Click here to get back to the more recent publications.

Scientific Publications

Corrosion and Creep/LCF
Mechanical Properties of Oxide Scales
Ni-Base Alloys and Coatings for Gas Turbines
Thermal Barrier Coatings
Diffusion Coatings
Coatings for Thermal Power Plants
Materials and Coatings for sulphidizing Atmospheres
Materials and Coatings for Carburizing Conditions and Metal Dusting Atmospheres
Materials and Coatings for Halogen-containing Atmospheres
Titanium Aluminides and other Ti Alloys
Silicides and Si-based Ceramics
Materials in Water Vapour-Containing Atmospheres
Heat-resisting Steels
Investigation Methods
Corrosion and Corrosion Protection in Liquid Media
Role of Microstructure
Mechanical High Temperature Properties Without Corrosion
Nanotechnology
Review Articles

Books

General Press Releases

Scientific Publications

Corrosion and Creep/LCF

K.-H. Döhle, A. Rahmel, M. Schmidt, M. Schütze: Two Different Test Rigs for Creep Experiments in Aggressive Environments; in "Corrosion and Mechanical Stress at High Temperatures", Hrsg. V. Guttmann, M. Merz, Applied Science Publishers, London (1981) 441
U. Bruch, K. Döhle, J. Pütz, A. Rahmel, M. Schütze, K.D. Schuhmacher: Comparison of the Corrosion Behaviour of Different High Temperature Alloys with and without Superimposed Creep Deformation in an Artificial Steam Reformer Atmosphere; in "Metallic Corrosion 1984", Bd. III, National Research Council Canada, Toronto (1984) 325
M. Schütze: The Influence of High Temperature Corrosion on Creep and Fracture Behaviour of Heat Resistant Steels; in "Creep and Fracture of Engineering Materials and Structures", Hrsg. B. Wilshire, D. Owen, Pineridge Press, Swansea (1984) 801
B. Ilschner, M. Schütze: Interaction Between Oxidation (Sulfidation, Carburization) and Creep; Oxidation of Metals 23 (1985) 287-292
J. Barbehön, A. Rahmel, M. Schütze: Behaviour of Alloy 800 H under Cyclic Deformation and Superimposed Oxidation; in "High Temperature Alloys for Gas Turbines and Other Applications 1986", Hrsg. W. Betz et al., D. Reidel Publishing Company, Dordrecht (1986) 1267
V. Guttmann, M. Schütze: Interactions of Corrosion and Mechanical Properties; in "High Temperature Alloys for Gas Turbines and Other Applications 1986", Hrsg. W. Betz et al., D. Reidel Publishing Company, Dordrecht (1986) 293
J. Barbehön, A. Rahmel, M. Schütze: Investigations on the Interaction of LCF and Oxidation; in "Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials", Hrsg. K.-T. Rie, Elsevier Appl. Sci., London (1987) 371
M. Welker, M. Schütze, A. Rahmel: Untersuchungen zur Wechselwirkung zwischen Korrosion und Rißfortschritt bei Hochtemperatur-Kriechverformung; in "Bruchvorgänge 1987", DVM, Berlin (1987) 345
M. Schütze: Anrißentstehung und Anrißwachstum unter korrosiven Bedingungen bei hohen Temperaturen; in "Korrosion und Bruch", DVM, Berlin (1988) 279
M. Schütze: Concept for the Assessment of the Contribution to Damage by the Interaction of High Temperature Corrosion and Mechanical Stresses; Proc. Conf. 9th Europ. Congr. Corr., Bd. I, Europ. Federation of Corrosion (1989) FU-202
M. Schütze: The Role of the Interaction of Corrosion and Mechanical Factors for Degradation of Materials; Materials Science and Engineering A 121 (1989) 563
M. Welker, A. Rahmel, M. Schütze: Oxidation and Nitridation of Alloy 800 H at a Growing Creep Crack and for Unstressed Samples; Metallurgical Transactions A 20 (1989) 1541
M. Welker, A. Rahmel, M. Schütze: Investigations on the Influence of Internal Nitridation on Creep Crack Growth in Alloy 800 H; Metallurgical Transactions A 20 (1989) 1553
M. Schütze, H. Fellmann: Investigations on Creep Crack Growth in Air and Oxygen + SO₂; in "High Temperature Materials for Power Engineering 1990", Hrsg. E. Bachelet et al., Kluwer Academic Publ., Dordrecht (1990) 199
M. Schütze: The Interaction of High Temperature Corrosion and Mechanical Factors; in "High Temperature Corrosion and Protection", Hrsg. H. Guan et al., Liaoning Science and Technology Publ., Shenyang (1991) 359
M. Schütze, H. Fellmann, B. Glaser: Kriechrißwachstum in Luft und SO₂-haltiger Umgebung; Materialprüfung 33 (1991) 11
M. Schütze, H. Fellmann, B. Glaser: Untersuchungen zum Kriechrißwachstum in Luft und O₂-SO₂; in "Bruchvorgänge 1991", DVM, Berlin (1991) 357
M. Welker, H. Fellmann, B. Glaser, M. Schütze: Creep Crack Growth of Materials for the Chemical and Petrochemical Industries; in "Heat-Resistant Materials", Hrsg. K. Natesan, D.J. Tillack, ASM International, Ohio (1991) 477
M. Schütze, H. Fellmann: Corrosion Processes at Growing Creep Cracks; in "Corrosion - Deformation Interactions", Hrsg. T. Magnin, J.M. Gras, Les Editions de Physique, Les Ulis (1992) 565-576
M. Schütze, B. Glaser: The Role of Environmental Effects for the Mechanical Behaviour of Materials at High Temperature; in "Aspects of High Temperature Deformation and Fracture in Crystalline Materials", Hrsg. Y. Hosoi et al., The Japan Institute of Metals, Sendai (1993) 561-567
M. Schütze: Hochtemperaturkorrosion und mechanische Beanspruchung; in "Korrosion verstehen - Korrosionsschäden vermeiden", Hrsg. H. Gräfen, A. Rahmel, Verlag Irene Kuron, Bonn (1994) 402-410
M. Schütze, B. Glaser: The Influence of Cl-Containing Atmospheres on Creep Crack Growth at 800ºC; in "Heat-Resistant Materials II", Hrsg. K. Natesan et al., ASM International, Materials Park (Ohio) (1995) 343-351
M. Schütze, V. Guttmann, M.F. Stroosnijder: Simultaneous Corrosion and Mechanical or Thermal Stresses; in "Guidelines for Methods of Testing and Research in High Temperature Corrosion", Hrsg. H.J. Grabke, D.B. Meadowcroft, European Federation of Corrosion Publications No. 14, The Institute of Materials, London (1995) 104-120
J.P.T. Vossen, M. Schütze: Limits for the Recovery of Chromium Oxide Scales on Heat-resistant Stainless Steels in Air With and Without Superimposed Mechanical Load at 650°C; Proc. Int. Conf. Corrosion-Deformation Interactions (CDI), Bd. IV, Paper P 40 Centre Français de l'Anticorrosion/Société de Chimie Industrielle, Paris (1996)
A. Jeutter, M. Schütze: The Influence of HCl-containing Atmospheres on High Temperature Corrosion of Coated and Uncoated Nickel-Base Superalloys under Complex Loading Conditions; Proc. EUROMAT 97, Bd. 1, Netherlands Society for Materials Science, Zwijndrecht/NL (1997) 223-226
M. Schütze: Werkstoffverhalten bei Wechselwirkung von Hochtemperaturkorrosion und mechanischer Belastung; in "Hochtemperaturkorrosion in der Prozeßtechnik", TAW-Verlag, Wuppertal (1998) 1-23
M. Schütze, A. Jeutter: High temperature corrosion resistance of gas turbine materials and coatings under the influence of Cl-contaminations; in "Materials for advanced power engineering 1998", Hrsg. J. Lecomte-Beckers et al., Reihe Energietechnik, Bd. 5, Forschungszentrum Jülich (1998) 1543-1552
A. Jeutter, M. Schütze: The Role of HCl Impurities in the Environment and Y for the High Temperature Corrosion of CoNiCrAl(Y)-Coatings on a Ni-base Superalloy under Complex Loading Conditions; Materials at High Temperatures 16 (1999) 71-86
A. Zeller, F. Dettenwanger, M. Schütze: Influence of Water Vapor on the Creep Behaviour of TiAl; in "Gamma Titanium Aluminides 1999", Hrsg. Y.-W. Kim et al., TMS, Warrendale (1999) 761-768
M. Schütze: Hochtemperaturkorrosion bei gleichzeitiger mechanischer Beanspruchung; in "Korrosion und Korrosionsschutz", Hrsg. E. Kunze, Wiley-VCH, Weinheim (2001) 648-687
A. Zeller, F. Dettenwanger, M. Schütze: Influence of water vapour on the creep and fatigue properties of TiAl; Intermetallics 10 (2002) 33-57

Mechanical Properties of Oxide Scales

M. Schütze, A. Rahmel: Das Verhalten von Oxidschichten unter mechanischer Belastung; in "Aufbau von Oxidschichten auf Hochtemperaturwerkstoffen und ihre technische Bedeutung", Hrsg. A. Rahmel, Deutsche Gesellschaft für Metallkunde, Oberursel (1983) 245
M. Schütze, A. Rahmel: Influence of Constant Strain Rates on Growth and Cracking Behavior of Oxide Scales and on Internal Corrosion of a 18Cr-0.8Al-1.5Si Steel; in "High Temperature Corrosion", Hrsg. R. Rapp, NACE, Houston (1983) 421
M. Schütze, A. Rahmel: Observations on the Cracking Behaviour of Oxide Scales During Creep of the Base Metal and on Creep Enhanced Internal Corrosion; in "Corrosion Resistant Materials for Coal Conversion Systems", Hrsg. D. Meadowcroft, M. Manning, Applied Science Publ, London (1983) 439
M. Schütze: Deformation and Cracking Behavior of Protective Oxide Scales on Heat-Resistant Steels under Tensile Strain; Oxidation of Metals 24 (1985) 199
M. Schütze: The Healing Behavior of Protective Oxide Scales on Heat-Resistant Steels after Cracking under Tensile Strain; Oxidation of Metals 25 (1986) 409
M. Schütze: Computer Simulation of Oxide Scale Cracking/Healing Processes under Substrate Creep at High Temperatures and Comparison of the Results to Experimental Data; Werkstoffe und Korrosion 38 (1987) 637
M. Schütze: The Limits to the Protective Effect of Oxide Scales on High Temperature Materials Which are Subjected to Strain; in "High Temperature Alloys - Their Exploitable Potential", Elsevier Applied Science, London (1987) 79
J. Barbehön, A. Rahmel, M. Schütze: Behavior of the Scale on a 9.5Cr Steel under Cyclical Deformation of the Base Metal; Oxidation of Metals 30 (1988) 85
M. Schütze: Stresses and Decohesion of Oxide Scales; Materials Science and Technology 4 (1988) 407
W. Christl, A. Rahmel, M. Schütze: Behavior of Oxide Scales on 2.25Cr-1Mo Steel During Thermal Cycling. I. Scales Formed in Oxygen and Air; Oxidation of Metals 31 (1989) 1
W. Christl, A. Rahmel, M. Schütze: Behavior of Oxide Scales on 2.25Cr-1Mo Steel During Thermal Cycling. II. Scales Grown in Water Vapor; Oxidation of Metals 31 (1989) 35
M. Schütze: Plasticity of Protective Oxide Scales; Materials Science and Technology 6 (1990) 32
I. Küppenbender, M. Schütze: Deformation and Cracking Behaviour of NiO Scales on Nickel; Proc. EUROCORR '91, GTE, Budapest (1991) 342
M. Schütze: Assessment of the Limits to the Protective Effect of Oxide Scales in High Temperature Technology, Set by Deformation of the Substrate Material; Int. J. Pres. Ves. Pip. 47 (1991) 293
A. Rahmel, M. Schütze: Mechanical Aspects of the Rare-Earth Effect; Oxidation of Metals 38 (1992) 255
M. Schütze: Failure of Oxide Scales on Advanced Materials Due to the Presence of Stresses; in "High Temperature Corrosion of Advanced Materials and Protective Coatings", Hrsg. Y. Saito et al., Elsevier, Amsterdam (1992) 39
M. Schütze: Fundamental Aspects of High Temperature Corrosion and The Role of Surface Layers in Corrosion-Deformation Interactions; in "Corrosion-Deformation Interactions", Hrsg. T. Magnin, J.M. Gras, Les Editions de Physique, Les Ulis (1992) 703
M. Schütze: Mechanical Aspects of High-Temperature Oxidation; Corrosion Science 35 (1993) 955-963
M. Walter, M. Schütze, A. Rahmel: Behavior of Oxide Scales on 12Cr-1Mo Steel During Thermal Cycling; Oxidation of Metals 39 (1993) 389-410
M. Walter, M. Schütze, A. Rahmel: Behavior of Oxide Scales on Alloy 800 H and HK 40 During Thermal Cycling; Oxidation of Metals 40 (1993) 37
A.M. Huntz, M. Schütze: Stresses Generated During Oxidation Sequences and High Temperature Fracture; Mater. High Temp. 12 (1994) 151-161
I. Küppenbender, M. Schütze: The Deformation Behavior of NiO Scales on Ni in Argon and Air at Temperatures from 20 to 800ºC With Respect to the Relief of Growth Stresses; Oxidation of Metals 42 (1994) 109-144
S.R.J. Saunders, M.M. Nagl, M. Schütze: Measurement Methods for the Determination of Fracture Strain; Mater. High Temp. 12 (1994) 103-109
M. Schütze: An Approach to a Global Model of the Mechanical Behaviour of Oxide Scales; Mater. High Temp. 12 (1994) 237-247
M. Schütze, M. Schmitz: The Oxidation Behaviour of Titanium Aluminide under the Effect of Mechanical Stresses; Trans. Mat. Res. Soc. Jpn. 14A (1994) 219-224
M. Schütze: Mechanical Properties of Oxide Scales; Oxidation of Metals 44 (1995) 29-61
M. Schütze, M. Schmitz-Niederau: Interaction of Mechanical Loading and Oxidation at 900ºC for TiAl; in "Gamma Titanium Aluminides", Hrsg. Y.-W. Kim, R. Wagner, M. Yamaguchi, TMS Warrendale (1995) 83-92
M. Schütze, J.R. Nicholls: Behavior of Scales Under Mechanical Loading; Oxidation of Metals 45 (1996) 605-613
C. Bruns, M. Schütze: Messung der Haftfestigkeit von Deckschichten mittels Schallemissionsanalyse; Berichtsband 58 "Statusberichte zur Entwicklung und Anwendung der Schallemissionsanalyse", Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. Berlin (1997) 235-237
M. Schütze, C. Bruns: Stresses and Adhesion of Surface Scales; in "Corrosion-Deformation Interactions", Hrsg. T. Magnin, EFC-Publ. No. 21, The Institute of Materials, London (1997) 308-318
M. Schütze, W. Przybilla: The role of stresses in oxidation and shape stability; in "Metal-supported automotive catalytic converters", Hrsg. H. Bode, Werkstoff-Informationsgesellschaft, Frankfurt am Main (1997) 163-177
W. Przybilla, M. Schütze: Monitoring stress relaxation processes in growing oxide scales via acoustic emission analysis; Proc. of the 23rd Europ. Conf. on Acoustic Emission Testing, Hrsg. P. Tscheliesnig, TÜV Österreich, Wien (1998) 74-79
M. Schütze: Mechanical Interactions in Oxide Scales; in "High Temperature Corrosion and Materials Chemistry", Hrsg. P.Y. Hou et al., The Electrochem. Soc., Pennington (1998) 1-17
M. Schmitz-Niederau, M. Schütze: Cracking and Healing of Oxide Scales on Ti-Al Alloys at 900°C; Oxidation of Metals 52 (1999) 241-276
C. Bruns, M. Schütze: Investigation of the Mechanical Properties of Oxide Scales on Nickel and TiAl; Oxidation of Metals 55 (2001) 35-68
M. Schütze: Hochtemperaturoxidation unter zyklischer Temperaturbeanspruchung; in "Korrosion und Korrosionsschutz", Hrsg. E. Kunze, Wiley-VCH, Weinheim (2001) 687-700
M. Schütze, S. Ito, W. Przybilla, H. Echsler, C. Bruns: Test Methods and Data on the Mechanical Properties of Protective Oxide Scales; Materials at High Temperatures 18 (2001) 39-50
W. Przybilla, M. Schütze: Role of growth stresses on the structure of oxide scales on nickel at 800 and 900°C; Oxidation of Metals 58 (2002) 103-145
W. Przybilla, M. Schütze: Growth stresses in the oxide scales on TiAl alloys at 800 and 900°C; Oxidation of Metals 58 (2002) 337-359
H. Echsler, M. Schütze, S. Ito: Deformation and fracture properties of oxide scales on mild steel at elevated temperatures; Current Advances in Materials and Processes (ISIJ) 16 (2003) 1329-1332
M. Schütze: Stress controlled mechanisms in the oxidation of metallic alloys; Proc. Int. Symp. "Corrosion Science in the 21st Century", UMIST, Manchester 2003 (CD), Journal of Corrosion Science and Engineering 6 (2003) 1-31
G. Wright, M. Schütze, S.R. Paterson, P.F. Tortorelli, R.B. Dooley: Progress in prediction and control of scale exfoliation on superheater and reheater alloys; Proc. EPRI International Conference on Boiler Tube and HRSG Tube Failures and Inspections, San Diego (2004)
M. Schütze: Modelling oxide scale fracture; Materials at High Temperatures 22 (2005) 147-154
M. Schütze, M. Malessa, D. Renusch, P.F. Tortorelli, I.G. Wright, R.B. Dooley: Mechanical Properties and Adherence of Oxide Scales; Materials Science Forum 522-523 (2006) 393
M. Schütze: Mechanical Properties of Oxide Scales as a Key Issue for Oxidation Resistance; Current Topics on High Temperature Materials 48 (2007) 301-313
I.G. Wright, M. Schütze, P.F. Tortorelli, R.B. Dooley: Towards improved prediction of scale exfoliation from steam tubes; Materials at High Temperatures 24 (2007) 265-274
M. Schütze, I. Wright, P. Tortorelli: Recent Advances in the quantitative characterisation of mechanical scale failure; J. Chinese Society for Corrosion and Protection 29 (2009) 313
M. Schütze, P.F. Tortorelli, I.G. Wright: Development of a comprehensive oxide scale failure diagram; Oxidation of Metals 73 (2010) 389-418

Ni-Base Alloys and Coatings for Gas Turbines

B. Reppich, H. Bügler, R. Leistner, M. Schütze: Application of the Microstructural Concept of Creep and Rupture Life Time to a γ'-Precipitating Ni-Base Alloy I. Yielding and Creep Behaviour; in "Creep and Fracture of Engineering Materials and Structures", Hrsg. B. Wilshire, D. Owen, Pineridge Press, Swansea (1984) 279
M. Göbel, A. Rahmel, M. Schütze: The Isothermal and Cyclic Oxidation Behaviour of Single-Crystal Nickel Base Superalloys in Air Between 800-1150ºC; in "High Temperature Materials for Power Engineering 1990", Hrsg. E. Bachelet et al., Kluwer Academic Publ., Dordrecht (1990) 1225
M. Göbel, A. Rahmel, M. Schütze: High Temperature Oxidation of Single-Crystal Superalloys; Proc. Eurocorr '91, GTE, Budapest (1991) 269
M. Göbel, A. Rahmel, M. Schütze: The Isothermal-Oxidation Behavior of Several Nickel-Base Single-Crystal Superalloys With and Without Coatings; Oxidation of Metals 39 (1993) 231
M. Göbel, A. Rahmel, M. Schütze: The Cyclic-Oxidation Behavior of Several Nickel-Base Single-Crystal Superalloys Without and With Coatings; Oxidation of Metals 41 (1994) 271-300
M. Göbel, A. Rahmel, M. Schütze, M. Schorr, W.T. Wu: Interdiffusion Between the Platinum-Modified Aluminide coating RT22 and Nickel-based Single-Crystal Superalloys at 1000 and 1200ºC; Mater. High Temp. 12 (1994) 301-309
T. Link, A. Rahmel, M. Schütze: The Influence of Gaseous Impurities in Air on the High Temperature Corrosion of Coated and Uncoated Nickel-based Superalloys; Materials at High Temperatures 13 (1995) 55-66
A. Jeutter, M. Schütze: The Influence of HCl-containing Atmospheres on High Temperature Corrosion of Coated and Uncoated Nickel-Base Superalloys under Complex Loading Conditions; Proc. EUROMAT 97, Bd. 1, Netherlands Society for Materials Science, Zwijndrecht/NL (1997) 223-226
M. Schütze, A. Jeutter: High temperature corrosion resistance of gas turbine materials and coatings under the influence of Cl-contaminations; in "Materials for advanced power engineering 1998", Hrsg. J. Lecomte-Beckers et al., Reihe Energietechnik, Bd. 5, Forschungszentrum Jülich (1998) 1543-1552
A. Jeutter, M. Schütze: The Role of HCl Impurities in the Environment and Y for the High Temperature Corrosion of CoNiCrAl(Y)-Coatings on a Ni-base Superalloy under Complex Loading Conditions; Materials at High Temperatures 16 (1999) 71-86
A. Littner, M. Schütze: The cyclic oxidation behaviour of several new aluminide and platinum aluminide diffusion coatings at 1150°C; Proc. Int. Symp. "Corrosion Science in the 21st Century", UMIST, Manchester 2003 (CD), The Journal of Corrosion Science and Engineering, Vol. 6 (2003)
E. Berghof-Hasselbächer, A. Littner, M. Schütze, M. Schorr, P. Gawenda: Charakterisierung von Al- und PtAl-Diffusion Coatings auf Ni-Basis-Superlegierungen; Sonderbände der Praktischen Metallographie 35 (2004) 325-336
K. Aleksandrov, M. Schütze: Depletion sensor for protective high temperature coatings; Proc. EUROCORR 2009 (CD), Nizza/F (2009)
E. Berghof-Hasselbächer, P.J. Masset, D. Texier, G. Schmidt, P. Gawenda, M. Jusek, M. Schütze: Mikrostrukturen von NiAl_(1-x)Hf_(x)-Legierungen (x=0…0,2); Sonderbände der Praktischen Metallographie 41 (2009) 113-119
I. Teliban, C. Thede, S. Chemnitz, C. Bechtold, W.J. Quadakkers, M. Schütze, E. Quandt: Magnetic moment investigation by frequency mixing techniques; Review of Scientific Instruments 80 (2009) 115106
H.-E. Zschau, P.J. Masset, D. Renusch, M. Schütze: Thermodynamical Considerations for applying the Halogen Effect to Ni-Base Superalloys; Proc. TMS Spring Meeting, San Francisco/USA (2009) 149-156
H.-E. Zschau, D. Renusch, P.J. Masset, M. Schütze: A new concept of oxidation protection of Ni-base alloys by using the halogen effect; Materials at High Temperatures 26 (2009) 85-89
H.-E. Zschau, D. Renusch, P.J. Masset, M. Schütze: The halogen effect for Ni-base alloys - a new method for increasing the oxidation protection at high temperatures; Nuclear Instruments and Methods in Physics Research B 267 (2009) 1662-1665
H. Latreche, G. Bozzolo, P.J. Masset, T. Weber, M. Schütze: Measurements of the coefficient of thermal expansion (CTE) of NiAlMo alloys and comparison with modelling predictions; Materials Science and Engineering: A 527/21-22 (2010) 5837
H.-E. Zschau, P.J. Masset, M. Schütze: Screening of the Fluorination Parameters to Improve the Oxidation Resistance of Ni-Base Superalloys at Elevated Temperatures; ECS Transactions 25 (2010) 21-30
H.-E. Zschau, P.J. Masset, M. Schütze: The Halogen Effect for Ni-Base Superalloys - a Thermodynamic Study; Materials Science Forum 638-642 (2010) 2375-2380
H.-E. Zschau, P.J. Masset, M. Schütze: Thermodynamical Assessment of the Halogen Effect for Ni-based Superalloys; Proc. 1st International Conference on Materials for Energy, Karlsruhe, 4.-8. Juli 2010 A281-283
H.-E. Zschau, M. Schütze: Application of Accelerators in High Temperature Materials Research; Proc. International Topical Meeting on Nuclear Research Applications and Utilization of Accelerators, Wien/A, 4.-8. Mai 2009, IAEA, Wien (2010)

Thermal Barrier Coatings

F. Dettenwanger, H. Echsler, C. Bruns, M. Schütze: Investigation of Damage Mechanisms in Thermal Barrier Coatings by Acoustic Emission; in "Elevated Temperature Coatings: Science and Technology III", Hrsg. J.M. Hampikian, N.B. Dahotre, TMS, Warrendale (1999)
H. Echsler, W. Przybilla, M. Schütze: Investigation of Bondcoat Oxidation and of Mechanical Behaviour of the Bondcoat Oxide for Life Time Prediction of TBC Systems; Proc. Eurocorr 2000 (CD), London
E. Berghof-Hasselbächer, H. Echsler, P. Gawenda, M. Schorr, M. Schütze: Zeit- und temperaturabhängige Entwicklung von physikalischen Defekten in Wärmedämmschichtsystemen; Sonderbände der Praktischen Metallographie 33 (2001) 275-281
R. Herzog, S. Heckmann, R. Steinbrech, D. Sebold, W.J. Quadakkers, F. Schubert, L. Singheiser, H. Echsler, M. Schütze: Contribution to Life Prediction of Thermal Barrier Coatings: A Concept of Accumulated Damage; Proceedings of Materials Week 2001, 1.-4. Oktober 2001, München
D. Renusch, H. Echsler, M. Schütze: New approaches to the understanding of failure and lifetime prediction of thermal barrier coating systems; in "Lifetime modelling of high temperature corrosion processes", Hrsg. M. Schütze, W.J. Quadakkers, J.R. Nicholls, Maney Publ., London (2001) 324-336
H. Echsler, D. Renusch, M. Schütze: Kinetics of the evolution of physical defects in the TGO and its vicinity for life time prediction of TBC systems; in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 152-156
V. Gauthier, M. Schütze: Oxidation behaviour of γ-TiAl coated with zirconia thermal barriers; in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 215-218
V. Gauthier, F. Dettenwanger, M. Schütze: Oxidation behavior of γ-TiAl coated with zirconia thermal barriers; Intermetallics 10 (2002) 667-674
R. Herzog, P. Majerus, E. Trunova, H. Echsler, R.W. Steinbrech, W.J. Quadakkers, F. Schubert, L. Singheiser, H. Echsler, M. Schütze,M.: Plasma-Sprayed Thermal Barrier Coatings for Gas Turbine Components - Degradation Parameters and Modelling Approach; Proceedings of the 2nd International Symposium on Integral Materials Modelling, September 2002, Aachen, Germany
D. Renusch, H. Echsler, M. Schütze: Life time modeling of APS-TBC by using acoustic emission analysis; in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 48-52
E. Berghof-Hasselbächer, H. Echsler, P. Gawenda, M. Schorr, M. Schütze: Time and temperature dependent development of physical defects in thermal barrier coating systems; Praktische Metallographie 40 (2003) 219-231
M. Schütze, D. Renusch, H. Echsler: The influence of oxidation on the life time of thermal barrier coatings; in "Proceedings of Corrosion 2003", Paper no. 03509, NACE, Houston (2003)
H. Echsler, D. Renusch, M. Schütze: Bond coat oxidation and its significance for life expectancy of thermal barrier coating systems; Materials science and technology 20 (2004) 307-318
H. Echsler, D. Renusch, M. Schütze: Mechanical behaviour of as sprayed and sintered air plasma sprayed partially stabilised zirconia; Materials science and technology 20 (2004) 869-876
D. Renusch, H. Echsler, M. Schütze: Progress in life time modeling of APS-TBC, Part I: residual, thermal and growth stresses including the role of thermal fatigue; Materials at High Temperatures 21 (2004) 65-76
D. Renusch, H. Echsler, M. Schütze: Progress in life time modeling of APS-TBC, Part II: Critical strains, macro-cracking, and thermal fatigue; Materials at High Temperatures 21 (2004) 77-86
D. Renusch, H. Echsler, M. Schütze: The role that interacting failure mechanisms have on the lifetime of APS-TBC under oxidizing conditions; Materials Science Forum 461-464 (2004) 729-736
H.-E. Zschau, M. Dietrich, D. Renusch, M. Schütze, J. Meijer, H.-W. Becker: Detection of Hydrogen in Hidden and Spalled Layers of Turbine Blade Coatings; Nuclear Instruments & Methods in Physics Research B 249 (2006) 381-383
D. Renusch, M. Schütze: Measuring and modeling the TBC damage kinetics by using acoustic emission analysis; Surface and Coatings Technology 202 (2007) 740-744
D. Renusch, M. Schütze: A prototype software tool for life time assessment of thermal barrier coating systems; Materials Science Forum 595-598 (2008) 151-158
D. Renusch, M. Schütze: The role that bond coat depletion of aluminum has on the lifetime of APS-TBC under oxidizing conditions; Materials and Corrosion 59 (2008) 547-555
M. Rudolphi, D. Renusch, H.-E. Zschau, M. Schütze: Hydrogen detection in buried layers of thermal barrier coatings; Materials Science Forum 595-598 (2008) 177-184
M. Rudolphi, D. Renusch, M. Schütze: Verification of moisture-induced delayed failure of thermal barrier coatings; Scripta Materialia 59 (2008) 255-257
M. Rudolphi, D. Renusch, H.-E. Zschau, M. Schütze, J. Meijer: The effect of moisture on the delayed spallation of thermal barrier coatings; Materials at High Temperatures 26 (2009) 325-329
H. Aleksanoglu, M. Rudolphi, D. Renusch, T.S. Mao, A. Scholz, C. Berger, M. Schütze: Untersuchung der Rissausbreitung in Wärmedämmschichtsystemen unter thermomechanischer Beanspruchung; Tagungsband FVV Informationstagung Turbomaschinen, Heft R552 (2010) 131-158
D. Renusch, M. Rudolphi, M. Schütze: Software tools for lifetime assessment of thermal barrier coatings, Part I - Thermal ageing failure and thermal fatigue failure; Journal of Solid Mechanics and Materials Engineering 4 (2010) 143-154
D. Renusch, M. Rudolphi, M. Schütze: Software tools for lifetime assessment of thermal barrier coatings, Part II - Bond coat aluminum depletion failure; Journal of Solid Mechanics and Materials Engineering 4 (2010) 155-166

Diffusion Coatings

A. Littner, M. Schütze: The cyclic oxidation behaviour of several new aluminide and platinum aluminide diffusion coatings at 1150°C; Proc. Int. Symp. "Corrosion Science in the 21st Century", UMIST, Manchester 2003 (CD), The Journal of Corrosion Science and Engineering, Vol. 6 (2003)
E. Berghof-Hasselbächer, A. Littner, M. Schütze, M. Schorr, P. Gawenda: Charakterisierung von Al- und PtAl-Diffusion Coatings auf Ni-Basis-Superlegierungen; Sonderbände der Praktischen Metallographie 35 (2004) 325-336
E. Berghof-Hasselbächer, E. Nicolas, V. Rohr, M. Schütze: Bildanalytische Schichtdickenbestimmung an Al-Diffusion Coatings; Sonderbände der praktischen Metallographie 36 (2004) 451-457
V. Rohr, A. Donchev, M. Schütze: Diffusion coatings for the high temperature corrosion protection of 9-12% Cr steels; Proc. EUROCORR 2004 Nizza/F (CD) (2004), paper no. 237
V. Rohr, M. Schütze: Diffusion coatings for heat exchanger materials; Surface Engineering 20 (2004) 266-274
V. Rohr, M. Schütze: Novel low temperature diffusion coatings for heat exchanger materials; Materials Science Forum 461-464 (2004) 401-408
T. Weber, M. Schütze: Kodiffusionsschichten aus Aluminium, Silizium und Titan zur Verbesserung der Hochtemperatur-Korrosionsbeständigkeit von Apparatebauwerkstoffen; in "Neue Materialien und Verfahren in der Beschichtungstechnik", Tagungsband zum 7. Werkstofftechnischen Kolloquium, Hrsg. B. Wielage, Chemnitz (2004) 181-186
A. Littner, F. Pedraza, A.D. Kennedy, P. Moretto, L. Peichl, T. Weber, M. Schütze: Performance and thermal stability of Pt-modified Al-diffusion coatings for superalloys under cyclic and isothermal conditions; Proceedings of the sixth international conference on the Microscopy of Oxidation, Birmingham, 4.-6. April 2005, Hrsg. G.J. Tatlock, H.E. Evans (2005) 245-254
V. Rohr, A. Donchev, M. Schütze, A. Milewska, F.J. Pérez: Diffusion coatings for high temperature corrosion protection of 9-12%Cr steels; Corrosion Engineering, Science and Technology 40 (2005) 226-232
V. Rohr, M. Schütze, E. Fortuna, D.N. Tsipas, A. Milewska, F.J. Perez: Development of novel diffusion coatings for 9-12% Cr ferritic-martensitic steels; Materials and Corrosion 56 (2005) 874-881
T. Weber, M. Schütze: Diffusion coatings for corrosion protection of high temperature structural materials; Defect and Diffusion Forum 237-240 (2005) 922-927
E. Berghof-Hasselbächer, V. Rohr, E. Nicolas, M. Schütze: Bildanalytische Schichtdickenbestimmung an Al-Diffusion Coatings; Praktische Metallographie 43 (2006) 127-142
E. Huttunen-Saarivirta, V. Rohr, F.H. Stott, M. Schütze: Influence of glass bead blasting of 9%Cr steel substrate on development of aluminide diffusion coatings; Surface Engineering 22 (2006) 472-480
E. Huttunen-Saarivirta, F.H. Stott, V. Rohr, M. Schütze: Particle angularity effects on the elevated-temperature erosion-oxidation behaviour of aluminium diffusion; Wear 261 (2006) 746-759
C. Geers, T. Weber, M. Schütze: New approach for the inhibition of carbon deposition on steel surfaces under metal dusting conditions; Proc. EUROCORR 2008 (CD), Edinburgh/UK (2008)
B. Rammer, T. Weber, M. Schütze: Diffusion coatings for aggressive high-temperature process environments; Proc. EUROCORR 2008 (CD), Edinburgh/UK (2008)
B. Rammer, T. Weber, M. Schütze: Entwicklung von Diffusionsschichten auf Nickelbasiswerkstoffen für den Einsatz in chlorhaltigen Hochtemperaturprozessen; Mat.-wiss. u. Werkstofftech. 39 (2008) 29-32
V. Vokál, V. Rohr, M.J. Pomeroy, M. Schütze: Corrosion of alloys and their diffusion aluminide coatings by KCl:K₂SO₄ deposits at 650°C in air; Materials and Corrosion 59 (2008) 374-379
C. Geers, M. Schütze: New surface protection system against Metal Dusting; in "Proceedings of Corrosion 2009" (CD), NACE, Atlanta/GA/USA (2009)
C. Geers, M. Schütze: Non-oxidizing intermetallic phases as an alternative to oxide forming coatings against coking and metal dusting; Proc. Aachener-Ölwärme-Kolloquium 2009, Shaker-Verlag, Aachen (2009) 204
C. Geers, M. Schütze: Selective inhibition of metals on material surfaces catalyzing the metal dusting process; ECS Transactions 25 (2009) 71-76
B. Rammer, T. Weber, M. Schütze: Diffusion coatings for aggressive high temperature process environments; Corrosion Engineering, Science and Technology 44 (2009) 227-233
B. Rammer, T. Weber, M. Schütze: Diffusion coatings for oxidizing high-chlorine environments at elevated temperatures; Proc. ICMCTF 2009, San Diego/USA (2009)

Coatings for Thermal Power Plants

G. Strehl, V. Guttmann, D. Naumenko, A. Kolb-Telieps, G. Borchardt, W.J. Quadakkers, J. Klöwer, P.A. Beaven, J.R. Nicholls: The influence of sample geometry on the oxidation and chemical failure of FeCrAl(RE) alloys; in "Lifetime modelling of high temperature corrosion processes", Hrsg. M. Schütze, W.J. Quadakkers, J.R. Nicholls, Maney Publ., London (2001) 107-122
V. Rohr, A. Donchev, M. Schütze: Diffusion coatings for the high temperature corrosion protection of 9-12% Cr steels; Proc. EUROCORR 2004 Nizza/F (CD) (2004), paper no. 237
V. Rohr, M. Schütze: Diffusion coatings for heat exchanger materials; Surface Engineering 20 (2004) 266-274
V. Rohr, M. Schütze: Novel low temperature diffusion coatings for heat exchanger materials; Materials Science Forum 461-464 (2004) 401-408
E. Huttunen-Saarivirta, S. Kalidakis, F.H. Stott, V. Rohr, M. Schütze: The erosion-corrosion resistance of uncoated and aluminized 12% chromium ferritic steels under fluidized-bed conditions at elevated temperature; Materials and Corrosion 56 (2005) 897-906
J. Kalivodova, D. Baxter, M. Schütze, V. Rohr: Gaseous corrosion of alloys and novel coatings in simulated environments for coal, waste and biomass boilers; Materials and Corrosion 56 (2005) 882-889
A. Littner, F. Pedraza, A.D. Kennedy, P. Moretto, L. Peichl, T. Weber, M. Schütze: Performance and thermal stability of Pt-modified Al-diffusion coatings for superalloys under cyclic and isothermal conditions; Proceedings of the sixth international conference on the Microscopy of Oxidation, Birmingham, 4.-6. April 2005, Hrsg. G.J. Tatlock, H.E. Evans (2005) 245-254
L. Nieto Hierro, V. Rohr, P.J. Ennis, M. Schütze, W.J. Quadakkers: Steam oxidation and its potential effects on creep strength of power station materials; Materials and Corrosion 56 (2005) 890-896
V. Rohr, A. Donchev, M. Schütze, A. Milewska, F.J. Pérez: Diffusion coatings for high temperature corrosion protection of 9-12%Cr steels; Corrosion Engineering, Science and Technology 40 (2005) 226-232
V. Rohr, M. Schütze, E. Fortuna, D.N. Tsipas, A. Milewska, F.J. Perez: Development of novel diffusion coatings for 9-12% Cr ferritic-martensitic steels; Materials and Corrosion 56 (2005) 874-881
V. Rohr, M. Schütze, P. Maugis, D. Poquillon, D. Monceau: Mechanism of the pack cementation process at low temperature on 9% Cr steels; Proc. Eurocorr 2005, Lissabon 2005 (CD)
T. Weber, M. Schütze: Diffusion coatings for corrosion protection of high temperature structural materials; Defect and Diffusion Forum 237-240 (2005) 922-927
E. Berghof-Hasselbächer, V. Rohr, E. Nicolas, M. Schütze: Bildanalytische Schichtdickenbestimmung an Al-Diffusion Coatings; Praktische Metallographie 43 (2006) 127-142
E. Huttunen-Saarivirta, V. Rohr, F.H. Stott, M. Schütze: Influence of glass bead blasting of 9%Cr steel substrate on development of aluminide diffusion coatings; Surface Engineering 22 (2006) 472-480
E. Huttunen-Saarivirta, F.H. Stott, V. Rohr, M. Schütze: Particle angularity effects on the elevated-temperature erosion-oxidation behaviour of aluminium diffusion; Wear 261 (2006) 746-759
L. Niewolak, M. Malessa, S. Y. Coleman, W. J. Quadakkers, M. Schütze: Influence of cycling parameter variation on thermal cyclic oxidation testing of high temperature materials (COTEST); Materials and Corrosion 57 (2006) 31-42
E. Huttunen-Saarivirta, F.H. Stott, V. Rohr, M. Schütze: Erosion-oxidation behavior of chromized-aluminized 9% chromium steel under fluidized-bed conditions at elevated temperature; Oxidation of Metals 68 (2007) 113-132
E. Huttunen-Saarivirta, F.H. Stott, V. Rohr, M. Schütze: Erosion-oxidation behaviour of pack-aluminized 9% chromium steel under fluidized-bed conditions at elevated temperature; Corrosion Science 49 (2007) 2844-2865
E. Huttunen-Saarivirta, S. Kalidakis, F.H. Stott, V. Rohr, M. Schütze: Erosion-Oxidation of Uncoated, Aluminized and Chromized-Aluminized 9Cr-1Mo Steels Under Fluidized-Bed Conditions at 550°C to 700°C; Tribology International 43 (2010) 161-170

Materials and Coatings for sulphidizing Atmospheres

B. Glaser, M. Schütze, F. Vollhardt: Auswertung von Daten zum H₂S-Angriff auf Stähle bei verschiedenen Temperaturen und Konzentrationen; Chem. Ing. Techn. 63 (1991) 634
M. Schulte, M. Schütze: Sulfide Scales for the Protection of Steels in H₂S-Containing Atmospheres; in "Corrosion Control for Low-Cost Reliability", NACE, Houston 1993
M. Schulte, M. Schütze: The Behaviour of Protective Sulfide Scales on Various Steels in H₂S-Containing Atmospheres during Temperature Changes; in "Progress in the Understanding and Prevention of Corrosion", Hrsg. J.M. Costa, A.D. Mercer, The Institute of Materials, London (1993) 750
M. Schütze: Einfluß von Temperaturänderungen auf das Verhalten schützender Sulfidschichten; Werkstoffe und Korrosion 47 (1996) 103-105
M. Schütze, M. Nöth: The Sulfidation Resistance of Several Fe- and Ni-Base Alloys and of Two Intermetallics in Atmospheres Containing H₂S at 400-700ºC; Proc. 13th ICC, Australasian Corrosion Association, Melbourne (1996) 1534-1542
K. Rahts, M. Nöth, M. Schulte, M. Schorr, P. Gawenda, M. Schütze: Untersuchungen an Sulfidschichten verschiedener Hochtemperaturwerkstoffe aus thermischer Beanspruchung in H₂S-haltiger Atmosphäre; Sonderbände der Praktischen Metallographie 28 (1997) 229-236
M. Schütze, M. Nöth: Materials for High Temperature Sulfidation Resistant Coatings; Proc. EUROCORR '97, NKF, Oslo (1997) 79-84
M. Schütze, M. Nöth: Protective Coatings for High Temperatures and High Sulfur-Low Oxygen Environments; in "Proceedings of Corrosion 1998", NACE, Houston (1998) 188/1-14
M. Schulte, A. Rahmel, M. Schütze: The Sulfidation Behavior of Several Commercial Ferritic and Austenitic Steels; Oxidation of Metals 49 (1998) 33-70
J. Jimenez Soler, J.F. Norton, M. Nöth, M. Schütze: The Corrosion Behaviour of a TiAl Coating Exposed to a Simulated Dry-feed Entrained Slagging Coal Gasifier Atmosphere Containing 0.8 % H₂S at 600°C; Materials and Corrosion 50 (1999) 373-446
M. Schulte, M. Schütze: The Role of Scale Stresses in the Sulfidation of Steels; Oxidation of Metals 51 (1999) 55-77
T. Weber, M. Schütze: Development of Protective Coatings for Reducing Environments at High Temperatures; in "Proceedings of Corrosion 1999", Paper No. 72, NACE, Houston (1999)
T. Weber, M. Schütze: Protective Coatings for Reducing and Sulfidizing Environments; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/6, DECHEMA, Frankfurt am Main (1999)
T. Weber, M. Schütze: Protective Coatings for Reducing Sulfidizing Environments at High Temperatures; Proc. China International Corrosion Control Conference '99 (CICCC'99), Hrsg. Z. Ren et al., China Chemical Anticorrosion Technology Association, Beijing (1999) 359-363
B. Aumüller, T. Weber, M. Schütze: Verfahrenstechnische Aspekte und Schutzwirkung von thermisch gespritzten TiAl-Schutzschichten für reduzierende Atmosphären; in "Schutzschichten für Hochtemperaturanwendungen", FDS, Dresden (2000)
T. Weber, M. Schütze: Coatings against high temperature H₂S-Corrosion; Proc. EUROCORR 2001 (CD) Associazione Italiana di Metallurgia, Milano (2001)
B. Aumüller, T. Weber, M. Schütze: Thermisch gespritzte Korrosionsschutzschichten für sulfidierende Atmosphären; Proc. Int. Thermal Spray Conference 2002, Hrsg. E. Lugscheider, DVS-Verlag, Düsseldorf (2002)
M. Schütze: High temperature corrosion - A materials challenge in modern high temperature technology; Ochrona przed korozja 45 (2002) 87-96
T. Weber, C. Rosado, M. Schütze: Development of Coatings for Environments with high sulfur and/or carbon activities at low oxygen potentials; in "Proceedings of Corrosion 2002", NACE, Houston (2002) 02371/1-12
M. Schütze, M. Spiegel: Korrosion in Anlagen zur thermischen Abfallverwertung; Proc. Jahrestagung 2004 der GfKORR - Gesellschaft für Korrosionsschutz e.V., Korrosionsschutz in der Chemieindustrie (CD), GfKORR, Frankfurt am Main (2004)
T. Weber, M. Schütze: Kodiffusionsschichten aus Aluminium, Silizium und Titan zur Verbesserung der Hochtemperatur-Korrosionsbeständigkeit von Apparatebauwerkstoffen; in "Neue Materialien und Verfahren in der Beschichtungstechnik", Tagungsband zum 7. Werkstofftechnischen Kolloquium, Hrsg. B. Wielage, Chemnitz (2004) 181-186
M. Schütze, M. Malessa, V. Rohr, T. Weber: Development of Coatings for Protection in Specific High Temperature Environments; Surface and Coatings Technology 201 (2006) 3872-3879
M. Schütze, H.K. Steinberg: Ursachen und Mechanismen der Korrosion in thermischen Anlagen; Verfahren & Werkstoffe für die Energietechnik: Korrosion in Anlagen zur regenerativen Energieerzeugung, Hrsg. M. Faulstich, D. Bendix, Förster Verl., Sulzbach-Rosenberg 2 (2006) 25-50
M. Schütze: Corrosion Resistance at elevated temperatures in highly aggressive environments; CORROSION 63 (2007) 4-18
B. Rammer, T. Weber, M. Schütze: Diffusion coatings for aggressive high-temperature process environments; Proc. EUROCORR 2008 (CD), Edinburgh/UK (2008)

Materials and Coatings for Carburizing Conditions and Metal Dusting Atmospheres

U.J. Brand, H.-E. Bühler, P. Karduk, S. Köhler, E. Berghof-Hasselbächer, M. Schütze: Investigations of a Valve Damaged by Oxidation and Carburisation; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/27, DECHEMA, Frankfurt am Main (1999)
U.J. Brand, H.-E. Bühler, P. Karduck, S. Köhler, E. Berghof-Hasselbächer, M. Schütze: Schäden durch Oxidation und Aufkohlung an Schiebern in einer Dehydrieranlage; Praktische Metallographie 36 (1999) 405-422
F. Dettenwanger, D. Grotmann, H. Friedrich, E. Berghof-Hasselbächer, M. Schorr, M. Schütze: Damage of a Heat-treatment Retort by Metal Dusting Attack; Materials and Corrosion 50 (1999) 289-293
C. Rosado, F. Dettenwanger, M. Schütze: Development of coatings against metal dusting attack; Proc. Int. Workshop Metal Dusting, 2000, Argonne National Lab., Argonne (2001) 213-224
C. Rosado, F. Dettenwanger, M. Schütze: Protection of steels against metal dusting attack by coatings; Proc. EUROCORR 2001 (CD) Associazione Italiana di Metallurgia, Milano (2001)
M. Schütze, C. Rosado, F. Dettenwanger: Protection of steels against metal dusting attack by coatings; Proc. Stainless Steel World 2001, KCI Publishing, Zutphen/NL (2001) 306-314
E. Berghof-Hasselbächer, H.-E. Bühler, O. Greven, M. Schorr, J. Schürhoff, M. Schütze: Untersuchungen zum Bauteilversagen von Rostsystemen bei der Restholzverbrennung; Praktische Metallographie 39 (2002) 369-386
E. Berghof-Hasselbächer, C. Rosado Sainz-Rosas, M. Schütze: Korrosionsschutzschichten gegen Metal Dusting Angriff; Sonderbände der Praktischen Metallographie 34, Hrsg. G. Petzow, Werkstoff-Informationsgesellschaft, Frankfurt am Main (2002) 271-281
M. Schütze: High temperature corrosion - A materials challenge in modern high temperature technology; Ochrona przed korozja 45 (2002) 87-96
T. Weber, C. Rosado, M. Schütze: Development of Coatings for Environments with high sulfur and/or carbon activities at low oxygen potentials; in "Proceedings of Corrosion 2002", NACE, Houston (2002) 02371/1-12
E. Berghof-Hasselbächer, C. Rosado Sainz-Rozas, M. Schütze: Korrosionsschutzschichten gegen Metal Dusting Angriff; Praktische Metallographie 40 (2003) 407-419
C. Rosado, M. Schütze: Protective behaviour of newly developed coatings against metal dusting; Materials and Corrosion 54 (2003) 831-854
M. Schütze: Metal Dusting, Carburization and Nitridation; Materials and Corrosion 54 (2003) 735
T. Weber, M. Schütze: Kodiffusionsschichten aus Aluminium, Silizium und Titan zur Verbesserung der Hochtemperatur-Korrosionsbeständigkeit von Apparatebauwerkstoffen; in "Neue Materialien und Verfahren in der Beschichtungstechnik", Tagungsband zum 7. Werkstofftechnischen Kolloquium, Hrsg. B. Wielage, Chemnitz (2004) 181-186
M. Schütze, M. Malessa, V. Rohr, T. Weber: Development of Coatings for Protection in Specific High Temperature Environments; Surface and Coatings Technology 201 (2006) 3872-3879
M. Schütze, H.K. Steinberg: Ursachen und Mechanismen der Korrosion in thermischen Anlagen; Verfahren & Werkstoffe für die Energietechnik: Korrosion in Anlagen zur regenerativen Energieerzeugung, Hrsg. M. Faulstich, D. Bendix, Förster Verl., Sulzbach-Rosenberg 2 (2006) 25-50
D. Röhnert, F. Phillipp, H. Reuther, T. Weber, E. Wessel, M. Schütze: Initial Stages in the Metal-dusting Process on Alloy 800; Oxidation of Metals 68 (2007) 271-293
D. Röhnert, M. Schütze, T. Weber: Performance of several nickel base alloys in metal dusting atmospheres; in "Proceedings of Corrosion 2007", NACE, Paper 074175/1-16
C. Rosado, M. Schütze: Protective behaviour of newly developed coatings against metal dusting; in "Corrosion by carbon and nitrogen: Metal dusting, carburisation and nitridation", Hrsg. H.J. Grabke, M. Schütze, Woodhead Publishing, Cambridge (2007) 103-153
M. Schütze: Corrosion Resistance at elevated temperatures in highly aggressive environments; CORROSION 63 (2007) 4-18
C. Geers, T. Weber, M. Schütze: New approach for the inhibition of carbon deposition on steel surfaces under metal dusting conditions; Proc. EUROCORR 2008 (CD), Edinburgh/UK (2008)
B. Rammer, T. Weber, M. Schütze: Diffusion coatings for aggressive high-temperature process environments; Proc. EUROCORR 2008 (CD), Edinburgh/UK (2008)
C. Geers, M. Schütze: New surface protection system against Metal Dusting; in "Proceedings of Corrosion 2009" (CD), NACE, Atlanta/GA/USA (2009)
C. Geers, M. Schütze: Non-oxidizing intermetallic phases as an alternative to oxide forming coatings against coking and metal dusting; Proc. Aachener-Ölwärme-Kolloquium 2009, Shaker-Verlag, Aachen (2009) 204
C. Geers, M. Schütze: Selective inhibition of metals on material surfaces catalyzing the metal dusting process; ECS Transactions 25 (2009) 71-76

Materials and Coatings for Halogen-containing Atmospheres

M. Schütze, P. Simon: Materials for Use in Atmospheres Containing HF in a Pyrohydrolysis Plant for Re-Processing Spent Pot Lining from Aluminium Production; Werkstoffe und Korrosion 45 (1994) 435-443
M. Schütze, B. Glaser: The Influence of Cl-Containing Atmospheres on Creep Crack Growth at 800ºC; in "Heat-Resistant Materials II", Hrsg. K. Natesan et al., ASM International, Materials Park (Ohio) (1995) 343-351
A. Jeutter, M. Schütze: The Influence of HCl-containing Atmospheres on High Temperature Corrosion of Coated and Uncoated Nickel-Base Superalloys under Complex Loading Conditions; Proc. EUROMAT 97, Bd. 1, Netherlands Society for Materials Science, Zwijndrecht/NL (1997) 223-226
K. Rahts, M. Schorr, C. Schwalm, M. Schütze: Untersuchungen über den Einfluß von Chlor bei der Hochtemperaturoxidation; Praktische Metallographie 29 (1998) 305-311
M. Schütze, A. Jeutter: High temperature corrosion resistance of gas turbine materials and coatings under the influence of Cl-contaminations; in "Materials for advanced power engineering 1998", Hrsg. J. Lecomte-Beckers et al., Reihe Energietechnik, Bd. 5, Forschungszentrum Jülich (1998) 1543-1552
R. Bender, M. Schütze: Corrosion Behaviour of Several Commercial Alloys in Oxidizing-Chloridizing Gas Mixtures at 650 to 1000°C; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/14, DECHEMA, Frankfurt am Main (1999)
A. Jeutter, M. Schütze: The Role of HCl Impurities in the Environment and Y for the High Temperature Corrosion of CoNiCrAl(Y)-Coatings on a Ni-base Superalloy under Complex Loading Conditions; Materials at High Temperatures 16 (1999) 71-86
K. Rahts, M. Schorr, C. Schwalm, M. Schütze: Wasserfreie Präparationsmethode zum Nachweis von Chloriden bei der Hochtemperaturoxidation in chlorhaltigen Atmosphären; Praktische Metallographie 36 (1999) 86-97
R. Bender, M. Schütze: Oxidation Behavior of Several Commercial Alloys in Chlorine-Containing High Temperature Environments; in "Proceedings of Corrosion 2000", Paper No. 239, NACE, Houston (2000)
C. Schwalm, M. Schütze: The Corrosion Behavior of Several Heat Resistant Materials in Air + 2 Vol-% Cl₂ at 300 to 800°C Part I - Fe-Base and Fe-Containing Alloys; Materials and Corrosion 51 (2000) 34-49
C. Schwalm, M. Schütze: The Corrosion Behavior of Several Heat Resistant Materials in Air + 2 Vol-% Cl₂ at 300 to 800°C Part 2 - Nickel Base Alloys; Materials and Corrosion 51 (2000) 73-79
C. Schwalm, M. Schütze: The Corrosion Behavior of Several Heat Resistant Materials in Air + 2 Vol-% Cl₂ at 300 to 800°C Part 3 - Alumina Formers and Intermetallics; Materials and Corrosion 51 (2000) 161-172
R. Bender, M. Schütze: Corrosion behaviour of several commercial alloys in oxidizing-chloridizing environments at 650-1000°C; Proc. EUROCORR 2001 (CD), Associazione Italiana di Metallurgia, Milano (2001)
M. Schütze, R. Bender: Hochtemperaturkorrosion in chlorhaltigen Atmosphären - Leistungsfähigkeit metallischer Werkstoffe und Möglichkeiten zur Erhöhung der Beständigkeit; in "Hochlegierte Werkstoffe - Korrosionsverhalten und ihre Anwendung", Bd. 3, TAW-Verlag, Wuppertal (2001)
M. Schütze: High temperature corrosion - A materials challenge in modern high temperature technology; Ochrona przed korozja 45 (2002) 87-96
R. Bender, M. Schütze: The role of alloying elements in commercial alloys for corrosion resistance in oxidizing-choridizing atmospheres Part I: Literature evaluation and thermodynamic calculations on phase stabilities; Materials and Corrosion 54 (2003) 567-586
R. Bender, M. Schütze: The role of alloying elements in commercial alloys for corrosion resistance in oxidizing-chloridizing atmospheres - Part 2: Experimental investigations; Materials and Corrosion 54 (2003) 652-686
M. Schütze, M. Spiegel: Korrosion in Anlagen zur thermischen Abfallverwertung; Proc. Jahrestagung 2004 der GfKORR - Gesellschaft für Korrosionsschutz e.V., Korrosionsschutz in der Chemieindustrie (CD), GfKORR, Frankfurt am Main (2004)
T. Weber, R. Bender, M. Schütze: Hochtemperaturkorrosion in chlorhaltiger Verbrennungsatmosphäre - Schutzkonzepte für metallische Werkstoffe; Optimierung der Abfallverbrennung 1, K.J. Thomé-Kozmiensky (Hrsg.), TK-Verlag, Neuruppin (2004) 581-598
M. Schütze, M. Malessa, V. Rohr, T. Weber: Development of Coatings for Protection in Specific High Temperature Environments; Surface and Coatings Technology 201 (2006) 3872-3879
M. Schütze, H.K. Steinberg: Ursachen und Mechanismen der Korrosion in thermischen Anlagen; Verfahren & Werkstoffe für die Energietechnik: Korrosion in Anlagen zur regenerativen Energieerzeugung, Hrsg. M. Faulstich, D. Bendix, Förster Verl., Sulzbach-Rosenberg 2 (2006) 25-50
H. Latreche, G. Tegeder, G. Wolf, P.J. Masset, T. Weber, M. Schütze: High temperature corrosion behaviour of NiAlMo APS-coatings in chlorine-based atmospheres; Proc. EUROCORR 2007 (CD), Freiburg (2007)
M. Schütze: Corrosion Resistance at elevated temperatures in highly aggressive environments; CORROSION 63 (2007) 4-18
H. Latreche, S. Doublet, G. Wolf, G. Tageder, P.J. Masset, T. Weber, M. Schütze: Behaviour of NiAl APS-coatings in chlorine-containing atmospheres; Materials and Corrosion 59 (2008) 573-583; in "Proceedings of Corrosion 2008", NACE, New Orleans/USA (2008)
H. Latreche, G. Tegeder, G. Wolf, P.J. Masset, T. Weber, M. Schütze: New approaches to improve high temperature corrosion resistance in chlorine-based atmospheres; Materials Science Forum 595-598 (2008) 307-321
B. Rammer, T. Weber, R. Bender, M. Schütze: Material solutions for the thermal treatment in high chlorine environments; in "Proceedings of Corrosion 2008", NACE, New Orleans/USA (2008)
B. Rammer, T. Weber, M. Schütze: Diffusion coatings for aggressive high-temperature process environments; Proc. EUROCORR 2008 (CD), Edinburgh/UK (2008)
B. Rammer, T. Weber, M. Schütze: Entwicklung von Diffusionsschichten auf Nickelbasiswerkstoffen für den Einsatz in chlorhaltigen Hochtemperaturprozessen; Mat.-wiss. u. Werkstofftech. 39 (2008) 29-32
E. Berghof-Hasselbächer, P.J. Masset, D. Texier, G. Schmidt, P. Gawenda, M. Jusek, M. Schütze: Mikrostrukturen von NiAl_(1-x)Hf_(x)-Legierungen (x=0…0,2); Sonderbände der Praktischen Metallographie 41 (2009) 113-119
H. Latreche, S. Doublet, M. Schütze: Development of Corrosion Assessment Diagrams for High Temperature Chlorine Corrosion. Part I: State of the Art and Development of the Basis for a New Extended Approach; Oxidation of Metals 72 (2009) 1-30
H. Latreche, S. Doublet, M. Schütze: Development of Corrosion Assessment Diagrams for High Temperature Chlorine Corrosion. Part II: Development of "Dynamic" Quasi-stability Diagrams; Oxidation of Metals 72 (2009) 31-65
P.J. Masset, D. Texier, M. Schütze: Coefficients of thermal expansion of (Ni_0.5Al_0.5)_1-xHf_x alloys (x = 0 ... 0.2); Materials Science and Technology 25 (2009) 874-879
B. Rammer, T. Weber, M. Schütze: Diffusion coatings for aggressive high temperature process environments; Corrosion Engineering, Science and Technology 44 (2009) 227-233
B. Rammer, T. Weber, M. Schütze: Diffusion coatings for oxidizing high-chlorine environments at elevated temperatures; Proc. ICMCTF 2009, San Diego/USA (2009)

Titanium Aluminides and other Ti Alloys

S. Becker, A. Rahmel, M. Schorr, M. Schütze: Mechanism of Isothermal Oxidation of the Intermetallic TiAl and of TiAl Alloys; Oxidation of Metals 38 (1992) 425-464
S. Becker, M. Schütze, A. Rahmel: Cyclic-Oxidation Behavior of TiAl and of TiAl Alloys; Oxidation of Metals 39 (1993) 93-106
M. Schütze, M. Schmitz: The Oxidation Behaviour of Titanium Aluminide under the Effect of Mechanical Stresses; Trans. Mat. Res. Soc. Jpn. 14A (1994) 219-224
A. Rahmel, W.J. Quadakkers, M. Schütze: Fundamentals of TiAl Oxidation - A Critical Review; Werkstoffe und Korrosion 46 (1995) 271-285
K. Rahts, M. Schorr, M. Schütze, M. Schmitz-Niederau: Darstellung von Oxidschichten und Gefüge von TiAl-Legierungen aus Hochtemperaturversuchen; Praktische Metallographie 27 (1995) 561-565
M. Schütze, M. Schmitz-Niederau: Interaction of Mechanical Loading and Oxidation at 900ºC for TiAl; in "Gamma Titanium Aluminides", Hrsg. Y.-W. Kim, R. Wagner, M. Yamaguchi, TMS Warrendale (1995) 83-92
C. Lang, M. Schütze: TEM Investigations of the Early Stages of TiAl Oxidation; Oxidation of Metals 46 (1996) 255-285
M. Schütze: Intermetallic Titanium Aluminides - Importance of Oxidation Resistance for Applications; Proc. Conf. Corrosion '96 - Theory and Practice, Hrsg. R. Juchniewicz, Politechnika Gdanska, Gdansk (1996) 41-58
M. Hald, M. Schütze: Isothermal Oxidation of P/M-TiAl Alloys; Materials Science Forum 251-254 (1997) 179-186
C. Lang, M. Schütze: Die Mechanismen der Anfangsoxidation und ihre Auswirkungen auf die Oxidationsbeständigkeit von Titanaluminiden; Proc. Werkstoffwoche 96, Hrsg. F. Aldinger, H. Mughrabi (1997) 871-876
C. Lang, M. Schütze: The Initial Stages in the Oxidation of TiAl; Materials and Corrosion 48 (1997) 13-22
M. Schütze, M. Hald: Improvement of the Oxidation Resistance of TiAl Alloys by Using the Chlorine Effect; Materials Science and Engineering A 239-240 (1997) 847-858
M. Schütze, M. Hald, C. Lang. S. Melsheimer, A. Rahmel: Intermetallic disilicides and titanium aluminides - a new class of structural high temperature materials under the aspect of their high temperature oxidation resistance; Pure & Appl. Chem. 69 (1997) 2335-2341
G. Schumacher, F. Dettenwanger, M. Hald, C. Lang, M. Schütze: The microalloying effect in the oxidation of TiAl-alloys; in "Solutions to corrosion problems", Jaarbeurs, Utrecht (1998)
F. Dettenwanger, M. Schütze: Isothermal Oxidation of α₂-Ti₃Al between 800 and 1000°C; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/28, DECHEMA, Frankfurt am Main (1999)
U. Hornauer, E. Richter, E. Wieser, W. Möller, G. Schumacher, C. Lang, M. Schütze: Improvement of the High Temperature Oxidation Resistance of Ti50 Al via Ion-Implantation; Nuclear Instruments and Methods in Physics Research B148 (1999) 858-862
M. Schmitz-Niederau, M. Schütze: The Oxidation Behaviour of Several Ti-Al Alloys at 900°C in Air; Oxidation of Metals 52 (1999) 225-240
M. Schmitz-Niederau, M. Schütze: Cracking and Healing of Oxide Scales on Ti-Al Alloys at 900°C; Oxidation of Metals 52 (1999) 241-276
G. Schumacher, F. Dettenwanger, M. Schütze, U. Hornauer, E. Richter, E. Wieser, W. Möller: Microalloying Effects in the Oxidation of TiAl Materials; Intermetallics 7 (1999) 1113-1120
G. Schumacher, C. Lang, M. Schütze, U. Hornauer, E. Richter, E. Wieser, W. Möller: Improvement of the Oxidation Resistance of γ-Titanium Aluminides by Microalloying with Chlorine using Ion Implantation; Materials and Corrosion 50 (1999) 162-165
A. Zeller, F. Dettenwanger, M. Schütze: Influence of Water Vapor on the Creep Behaviour of TiAl; in "Gamma Titanium Aluminides 1999", Hrsg. Y.-W. Kim et al., TMS, Warrendale (1999) 761-768
A. Zeller, F. Dettenwanger, M. Schütze: Influence of Water Vapour on the Oxidation Behaviour of TiAl at 700 and 750°C; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/31, DECHEMA, Frankfurt am Main (1999)
F. Dettenwanger, M. Schütze: Isothermal Oxidation of α₂-Ti₃Al; Oxidation of Metals 54 (2000) 121-138
U. Hornauer, R. Günzel, H. Reuther, E. Richter, E. Wieser, W. Möller, G. Schumacher, F. Dettenwanger, M. Schütze: Protection of γ-based TiAl Against High Temperature Oxidation Using Ion Implantation of Chlorine; Surface and Coatings Technology 125 (2000) 89-93
U. Hornauer, E. Richter, W. Matz, H. Reuther, A. Mücklich, E. Wieser, W. Möller, G. Schumacher, M. Schütze: Microstructure and oxidation kinetics of intermetallic TiAl after Si- and Mo- ion implantation
Surface and Coatings Technology 128-129 (2000) 418-422
A. Ralison, F. Dettenwanger, M. Schütze: Oxidation in air and hot corrosion behavior of orthorhombic Ti2AlNb alloys; Proc. Eurocorr 2000 (CD), London
A. Ralison, F. Dettenwanger, M. Schütze: Oxidation of Orthorhombic Ti2AlNb Alloys at 800°C in Air; Materials and Corrosion 51 (2000) 317-328
M. Schütze, G. Schumacher, F. Dettenwanger, U. Hornauer, E. Richter, E. Wieser, W. Möller: Einfluß einer oberflächennahen Dotierung auf die Oxidationskinetik von TiAl-Werkstoffen; in "Schutzschichten für Hochtemperaturanwendungen", FDS, Dresden (2000)
G. Schumacher, F. Dettenwanger, M. Schütze: Investigations of the Microalloying Effect of Chlorine in the Oxidation of TiAl Alloys; Materials at High Temperatures 17 (2000) 53-58
G. Schumacher, F. Dettwanger, M. Schütze, A. Iberl, D. Reil: XRD Investigations of the Phosphorus Effect on the Oxidation of TiAl Alloys by High-Resolution Methods; Oxidation of Metals 54 (2000) 317-337
C. Bruns, M. Schütze: Investigation of the Mechanical Properties of Oxide Scales on Nickel and TiAl; Oxidation of Metals 55 (2001) 35-68
A. Donchev, M. Schütze: Improvement of the oxidation resistance of γ-TiAl alloys by ion implantation; in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 134-136
V. Gauthier, F. Dettenwanger, M. Schütze: Oxidation behavior of γ-TiAl coated with zirconia thermal barriers; Intermetallics 10 (2002) 667-674
V. Gauthier, M. Schütze: Oxidation behaviour of γ-TiAl coated with zirconia thermal barriers; in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 215-218
W. Przybilla, M. Schütze: Growth stresses in the oxide scales on TiAl alloys at 800 and 900°C; Oxidation of Metals 58 (2002) 337-359
M. Schütze, A. Donchev, V. Gauthier, H.-E. Zschau: Improvement of the oxidation resistance of intermetallic TiAl alloys by the halogen effect; Proc. 15 Int. Corr. Congress, Granada (CD) (2002) Paper 782
M. Schütze, G. Schumacher, F. Dettenwanger, U. Hornauer, E. Richter, E. Wieser, W. Möller: The halogen effect in the oxidation of intermetallic titanium aluminides; Corrosion Science 44 (2002) 303-318
A. Zeller, F. Dettenwanger, M. Schütze: Influence of water vapour on the creep and fatigue properties of TiAl; Intermetallics 10 (2002) 33-57
A. Zeller, F. Dettenwanger, M. Schütze: Influence of water vapour on the oxidation behaviour of titanium aluminides; Intermetallics 10 (2002) 59-72
H.-E. Zschau, V. Gauthier, M. Schütze, H. Baumann, K. Bethge: Investigation of the fluorine microalloying effect in the oxidation of TiAl at 900°C in air; in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 210-214
A. Donchev, B. Gleeson, M. Schütze: Thermodynamic considerations of the beneficial effect of halogens on the oxidation resistance of TiAl-based alloys; Intermetallics 11 (2003) 387-398
A. Donchev, M. Schütze, E. Richter, U. Hornauer, E. Wieser: Erhöhung der Oxidationsbeständigkeit von TiAl-Legierungen durch Ionenimplantation; Tagungsband 1, KKF-Kolloquium "Problemlösungen für den metallischen Leichtbau", Januar 2003, GfKORR e.V., Frankfurt (2003)
V. Gauthier, F. Dettenwanger, M. Schütze, V. Shemet, W.J. Quadakkers: Oxidation-resistant aluminide coatings on γ-TiAl; Oxidation of Metals 59 (2003) 233-255
U. Hornauer, E. Richter, E. Wieser, W. Möller, A. Donchev, M. Schütze: Plasma immersion ion implantation of TiAl using chlorine containing plasma; Surface and Coatings Technology 173-174 (2003) 1182-1186
A. Ralison, F. Dettenwanger, M. Schütze: Oxidation of orthorhombic Ti2AlNb alloys in the temperature range 550-1000°C in air; Proceedings of the Fifth International Conference on the Microscopy of Oxidation, Limerick, 26-28 August 2002, Hrsg. S.B. Newcomb, G. Tatlock (2003) 361-383
A. Ralison, F. Dettenwanger, M. Schütze: Oxidation of orthorhombic Ti2AlNb alloys in the temperature range 550-1000°C in air; Materials at High Temperatures 20 (2003) 607-629
H.-E. Zschau, V. Gauthier, G. Schumacher, F. Dettenwanger, M. Schütze, H. Bauman: Investigation of the fluorine microalloying effect in the oxidation of TiAl at 900°C in Air; Oxidation of Metals 59 (2003) 183-200
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge: Formation of an Alumina Scale after Fluorine Application and Oxidation of TiAl at 900°C in Air; Proceedings of the 203rd Meeting of The Electrochemical Society, Pennington (2003)
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge: Investigation of the fluorine microalloying effect in the oxidation of TiAl at 900°C in Air; Proceedings of the 203rd Meeting of The Electrochemical Society, Pennington (2003)
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge: Investigation of the mechanism of the fluorine microalloying effect at the oxidation of TiAl using nuclear physics methods; Proceedings of the Michal Smialowski International Symposium on Corrosion and Hydrogen Degradation: Advances in Corrosion Science and Application. 9.-13.9.2003, Zakopane (2003) 187-192
A. Donchev, M. Schütze: Cyclic oxidation behaviour of halogen implanted Ti-46.5Al-4(Cr, Nb, Ta, B); Materials Science Forum 461-464 (2004) 447-454
A. Donchev, M. Schütze: Gib Sauerstoff bei Leichtmetallen keine Chance; in "Trendbarometer Technik", H.-J. Bullinger (Hrsg.), Hanser Verlag. Berlin (2004) 148-149
A. Donchev, M. Schütze: Hochtemperatur Oxidationsschutz für intermetallische Titanaluminidleichtbaulegierungen durch Nutzung des Halogeneffekts; Proc. Oberflächentage 2004, Deutsche Gesellschaft für Galvano- und Oberflächentechnik e.V. (DGO, Düsseldorf (2004) 93-99
A. Donchev, M. Schütze: Oxidationsschutz durch Halogene; Metalloberfläche 58 (2004) 32-34
A. Donchev, H.-E. Zschau, M. Schütze: The astounding effect of halogens improving the oxidation resistance of titanium aluminide light weight materials; in "Trends in Electrochemistry and Corrosion at the Beginning of the 21st Century", Hrsg. E. Brilas, P.-L. Cabot, Publ. Universitat de Barcelona (2004) 1097-1123
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge: The Quantitative Role of Surface Doped Fluorine for the Improvement of Oxidation Resistance of TiAl in Air; Materials Science Forum 461-464 (2004) 505-512
A. Donchev, H.-E. Zschau, M. Schütze: The halogen effect for improving the oxidation resistance of TiAl-alloys; Materials at High Temperatures 22 (2005) 309-314
M. Schütze: Recent advances in the understanding of the halogen effect in the oxidation of intermetallic titanium aluminides; in "High temperature corrosion and materials chemistry V: Proceedings of the International Symposium of the Electrochemical Society", Hrsg. E. Opila, J.W. Fergus, T. Maruyama, J. Mizusaki (2005) 1-15
H.-E. Zschau, M. Schütze: Ein kostensparendes Verfahren zur Verbesserung der Oxidationsbeständigkeit von Gamma-TiAl-Legierungen bei Temperaturen von 800°C bis 1000°C; Metalloberfläche 59 (2005) 1-25
H.-E. Zschau, M. Schütze: Oxidationsschutz durch Fluor - Verbesserung der Oxidationsbeständigkeit von Gamma-TiAl-Legierungen bei Temperaturen von 800 bis 1.000 Grad Celsius; Metalloberfläche 59 (2005) 31-34
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge: Application of ion beam analysis for the control of the improvement of the oxidation resistance of TiAl at 900 °C in air by fluorine ion implantation an HF-treatment; Nuclear Instruments and Methods in Physics Research B 240 (2005) 137-141
A. Donchev, E. Richter, M. Schütze, R. Yankov: Improvement of the Oxidation Behaviour of TiAl-alloys by Treatment with Halogens; Intermetallics 14 (2006) 1168-1174
A. Donchev, M. Schütze: Oxidationsschutz durch Fluorbehandlung; Metalloberfläche 60/12 (2006) 26-28
A. Donchev, M. Schütze, J. Heller, M. Scheydecker: Oxidationsschutz für Titanaluminidbauteile durch Oberflächenbehandlung mit Fluor; Oberflächentage 2006, Proceedings (CD), ZWO, Bonn (2006)
P.J. Masset, A. Donchev, H.-E. Zschau, M. Schütze: Recent developments in the high temperature oxidation protection of TiAl-alloys by using the fluorine effect; Proc. EuroCorr 2006 Part 2 (2006) 587-598
P.J. Masset, H.-E. Zschau, M. Schütze: TiAl oxidation protection improvements using the halogen effect; Proc. 8th Liege Conference. Materials for Advanced Power Engineering, Hrsg. J. Lecomte-Beckers, M. Carton, F. Schubert, P.J. Ennis, Schriften des Forschungszentrums Jülich 53 (2006) 783-792
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge: The time behaviour of surface applied fluorine inducing the formation of an alumina scale on gamma-TiAl during oxidation at 900°C in air; Intermetallics (2006) 1136-1142
P.J. Masset, H.-E. Zschau, M. Schütze: Comparative fluorine surface treatments for TiAl oxidation protection; Ti-2007 Science and Technology, Journal of the Japan Institute of Metals (2007) 1699-1702
S. Neve, H.-E. Zschau, P.J. Masset, M. Schütze, R. Dörner: Kurzzeitoxidation Fluor-implantierter TiAl-Legierungen; Jahresbericht 2007, Institut für Kernphysik, Universität Frankfurt am Main
R.A. Yankov, A. Kolitsch, A. Rogozin, M. Steinert, A. Donchev, M. Schütze: Oxidation-resistant γ-TiAl alloys produced by ion implantation of fluorine; Proc. E-MRS Spring Symposium, Strasbourg/F (2007)
R.A. Yankov, A. Kolitsch, M. Steinert, A. Donchev, M. Schütze: Oxidation-resistant TiAl alloys produced by plasma immersion ion implantation of fluorine; Proc. 9th Int. Workshop on Plasma Based Ion Implantation & Deposition, Leipzig (2007)
R.A. Yankov, N. Shevchenko, A. Rogozin, M.F. Maitz, E. Richter, W. Möller, A. Donchev, M. Schütze: Reactive plasma immersion ion implantation for surface passivation; Surface and Coatings Technology 201 (2007) 6752-6758
H.-E. Zschau, M. Schütze: Formation of a protective Alumina Layer by Fluorine Doping of Titanium Aluminide Surfaces; Ti-2007 Science and Technology, Journal of the Japan Institute of Metals (2007) 1695-1698
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge: Surface modification of titanium aluminides with fluorine to improve their application for high temperature service conditions; Nuclear Instruments and Methods in Physics Research B 257(2007) 383-387
E. Berghof-Hasselbächer, S. Diliberto, P. Gawenda, P.J. Masset, G. Schmidt, M. Schütze: Metallographische Untersuchungen der Mikrostrukturen von technischen TiAl-Legierungen; Sonderbände der Praktischen Metallographie 40 (2008) 117-124
A. Donchev, A. Kolitsch, W. Möller, M. Schütze, R. Yankov: The fluorine effect for high temperature oxidation protection of TiAl-alloys for automotive and aero-engine applications; in "Structural Aluminides for Elevated Temperatures", Hrsg. Y.-W. Kim, D. Morris, R. Yang, C. Leyens, TMS Warrendale/USA (2008) 323-332
A. Donchev, E. Richter, M. Schütze, R. Yankov: Improving the Oxidation Resistance of TiAl-Alloys with Fluorine; Journal of Alloys and Compounds 452 (2008) 7-10
A. Donchev, M. Schütze: Improving the Oxidation Resistance of γ-Titanium Aluminides by Halogen Treatment; Materials and Corrosion 59 (2008) 489-493
A. Donchev, M. Schütze: The use of fluorine for the protection of TiAl-components against high-temperature oxidation; VDI-Berichte 2008, 1st EUCOMAS, VDI Verlag Düsseldorf (2008) 393-398
P.J. Masset, S. Neve, H.-E. Zschau, R. Dörner, M. Schütze: Influence of alloy compositions on the halogen effect in TiAl alloys; Materials and Corrosion 59 (2008) 609-618
P.J. Masset, M. Schütze: Improvement of the oxidation resistance of TiAl alloys using controlled gaseous fluorination; ECS Trans. 11 (2008) 37
P.J. Masset, M. Schütze: Thermodynamic assessment of the alloy concentration limits for the halogen effect of TiAl alloys; Advanced Engineering Materials 10 (2008) 666-674
H.-E. Zschau S. Neve, P.J. Masset, M. Schütze, H. Baumann, K. Bethge: Characterization of the long time oxidation protection of fluorine implanted technical TiAl-alloys using ion beam methods; Nuclear Instruments and Methods in Physics Research B 266 (2008) 2441-2445
H.-E. Zschau, M. Schütze: Modelling of the long time stability of the fluorine effect in TiAl oxidation; Materials and Corrosion 59 (2008) 619-623
H.-E. Zschau, M. Schütze: Multiple F-Implantation for Improved Oxidation Protection of Gamma-TiAl Alloy; Proceedings of the TMS Conference "Structural Aluminides for Elevated Temperature Applications", New Orleans/USA (2008)
A. Donchev, R. Braun, M. Schütze: Fluorine treatment for improved adherence of EB-PVD thermal barrier coatings on TiAl alloys; in TMS 2009 Supplemental Proceedings Vol. 1: Materials Processing and Properties, The Metals and Minerals Society (TMS) Warrendale/USA (2009) 211
A. Donchev, P.J. Masset, M. Schütze: Surface treatment of TiAl with fluorine for improved performance at elevated temperatures; Mater. Res. Soc. Symp. Proc. 1128 (2009) 159
A. Donchev, R. Pflumm, M. Schütze: Application of the fluorine effect to TiAl-components; Materials Research Society Symposium Proceedings 1128 (2009) 209
A. Donchev, M. Schütze, R. Yankov, A. Kolitsch: Plasma-Immersion-Ion-Implantation of Fluorine to Protect TiAl-Components against High Temperature Oxidation; Plasma Processes and Polymers 6/6-7 (2009) 434
P.J. Masset, M. Laurent, M. Schütze: Characterisation of the oxide/metal interface of fluorine treated titanium aluminides; Defect and Diffusion Forum 289-292 (2009) 397-404
E. Wild, W. Reimers, R. Pflumm, M. Schütze: Space-resolved 2D X-ray phase analysis on structured TNB-V5 after oxidation for 24hr at 900°C; Jahresbericht HASYLAB 2008 (2009)
R.A. Yankov, A. Kolitsch, J. Borany, F. Munnik, A. Donchev, M. Schütze: Surface modification of Ti and low Al-content Ti-alloys for enhanced environmental stability at elevated temperatures; E-MRS Spring Meeting 2009, Proceedings (CD)
E. Berghof-Hasselbächer, P. Gawenda, P.J. Masset, G. Schmidt, M. Schütze, S. Diliberto: Metallographische Untersuchungen der Mikrostrukturen von technischen TiAl-Legierungen; Praktische Metallographie 47 (2010) 65-83
A. Donchev, R. Braun, M. Schütze: Optimizing thermally grown oxide for thermal barrier coatings on TiAl components via fluorine treatment; JOM 62/1 (2010) 70
A. Donchev, M. Schütze: Comparison of different fluorine treatments for the protection of TiAl-alloys against high temperature oxidation; Materials Science Forum 638-642 (2010) 1294
A. Donchev, M. Schütze: Fluorine treatment of TiAl-components for enhancing high-temperature oxidation resistance; EUCOMAS 2010 Proceedings (CD)
A. Donchev, M. Schütze, A. Kolitsch, R. Yankov: Enhanced resistance of Ti-alloys against environmental attack by a combined Al- and F-treatment; TMS 2010 Supplemental Proceedings Vol. 3: Generals Paper Selections, The Metals and Minerals Society (TMS) Warrendale (2010) 119
A. Donchev, M. Schütze, A. Kolitsch, R. Yankov: Improved environmental resistance of Ti-alloys at elevated temperatures by a combined Al- and F-Treatment; Materials Science & Technology MS&T 2010 Proceedings (CD)
A. Donchev, M. Schütze, A. Kolitsch, R. Yankov: Investigation of the F-effect for oxidation protection of 1st, 2nd and 3rd generation TiAl-alloys; MS&T 2010: Proceedings of Materials Science and technology (2010) 2140-2148
A. Donchev, M. Schütze, A. Kolitsch, R. Yankov: Protection of TiAl-components against high temperature oxidation with fluorine; Materials Science & Technology MS&T 2010 Proceedings (CD)
P.J. Masset, R. Yankov, A. Kolitsch, M. Schütze: Comparison of fluorination treatments to improve the high temperature oxidation resistance of TiAl alloys in SO₂ containing environments; Materials Science Forum 638-642 (2010) 1374-1378
P.J. Masset, M. Schütze: Oxidation tests with untreated and F-treated TNBV5 alloys; ECS Transactions 25 (2010) 45-56
S. Neve, P.J. Masset, R.A. Yankov, A. Kolitsch, H.-E. Zschau, M. Schütze: High temperature oxidation resistance of fluorine-treated TiAl alloys: Chemical vs. ion beam fluorination techniques; Nuclear Instruments and Methods in Physics Research B 268/21 (2010) 3381-3385
S. Neve, P.J. Masset, H.-E. Zschau, M. Schütze: Effect of Heating Rate on the Fluorine Content in TiAl-alloy After Oxidation at 900°C; ECS Transactions 25 (2010) 79-86
S. Neve, K. Stiebing, L.P.H. Schmidt, H.-E. Zschau, P.J. Masset, M. Schütze: Non-destructive fluorine depth profiling as quality assurance for the oxidation protection of TiAl turbine blades; Materials Science Forum 638-642 (2010) 1384-1389

Silicides and Si-based Ceramics

S. Becker, A. Rahmel, M. Schütze: Oxidation of TiSi₂ and MoSi₂; Solid State Ionics 53-56 (1992) 280-289
S. Melsheimer, A. Rahmel, M. Schütze: Mechanismus der Hochtemperaturoxidation von Molybdän- und Titandisilizid; in "Refractory Metals and Hard Materials - Key to Advanced Technologies", Hrsg. H. Bildstein, R. Eck, Bd. 1, Plansee Metall AG, Reutte (1993) 939
K. Bundschuh, S. Melsheimer, M. Schütze: Hochtemperaturoxidation von MoSi₂ als Beschichtungswerkstoff auf SiC-Keramik; Fortschrittsber. DKG 10 (1995) 182-194
K. Bundschuh, M. Schütze: The Characterisation of the Environmental Resistance of Advanced Materials above 1500ºC; Proc. esa/estec 3rd European Workshop on High Temperature Materials, esa - European Space Agency, Paris (1996) 145-150
K. Bundschuh, M. Schütze, C. Müller, P. Greil, W. Heider: Selection of Materials for Use at Temperatures above 1500°C in Oxidizing Atmospheres; Key Engineering Materials 132-136 (1997) 1564-1567
S. Melsheimer, M. Fietzek, V. Kolarik, A. Rahmel, M. Schütze: Oxidation of the Intermetallics MoSi₂ and TiSi₂- A Comparison; Oxidation of Metals 47 (1997) 139-203
S. Melsheimer, A. Rahmel, M. Schütze: Changes in the Transport Properties of Silicon Dioxide Due to Doping of Foreign Ions; Oxidation of Metals 47 (1997) 205-213
M. Schütze, M. Hald, C. Lang. S. Melsheimer, A. Rahmel: Intermetallic disilicides and titanium aluminides - a new class of structural high temperature materials under the aspect of their high temperature oxidation resistance; Pure & Appl. Chem. 69 (1997) 2335-2341
K. Bundschuh, M. Schütze, C. Müller, P. Greil, W. Heider: Selection of Materials for Use at Temperatures Above 1500°C in Oxidizing Atmospheres; Journal of the European Ceramic Society 18 (1998) 2389-2391
S. Lohfeld, F. Dettenwanger, M. Schütze, R. Rix, V. Güther, R. Scholl: Influence of Second Phase Particles on the Oxidation Behaviour of MoSi₂ at 1600°C in Air; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/29, DECHEMA, Frankfurt am Main 1999
S. Lohfeld, F. Dettenwanger, M. Schütze, K. Bundschuh, R. Rix, V. Güther, R. Scholl: Investigation of the Oxidation Behaviour of Selected MoSi₂ Based Composites at High Temperatures; Proc. Eurocorr 2000 (CD), London
K. Bundschuh, M. Schütze: Materials for Temperatures above 1500°C in Oxidizing Atmospheres Part I: Basic Considerations on Materials Selection; Materials and Corrosion 52 (2001) 204-212
K. Bundschuh, M. Schütze: Materials for Temperatures above 1500°C in Oxidizing Atmospheres Part II: Experimental Results on the Oxidation of MoSi₂ Composites and Coated RSiC; Materials and Corrosion 52 (2001) 268-282
K. Bundschuh, M. Schütze: Materials for Temperatures above 1500°C in Oxidizing Atmospheres Part III: Contact Reaction Tests; Materials and Corrosion 52 (2001) 351-361
S. Lohfeld, M. Schütze: Oxidation behaviour of particle reinforced MoSi₂ composites at temperatures up to 1700°C - Part I: Literature review; Materials and Corrosion 56 (2005) 93-97
S. Lohfeld, M. Schütze, A. Böhm, V. Güther, R. Rix, R. Scholl: Oxidation behaviour of particle reinforced MoSi₂ composites at up to 1700 deg C - Part II: Initial screening of the oxidation behaviour of MoSi₂ composites; Materials and Corrosion 56 (2005) 149-158
S. Lohfeld, M. Schütze, A. Böhm, V. Güther, R. Rix, R. Scholl: Oxidation behaviour of particle reinforced MoSi₂ composites at temperatures up to 1700°C - Part III: Oxidation behaviour of optimised MoSi₂ composites; Materials and Corrosion 56 (2005) 250-258

Materials in Water Vapour-Containing Atmospheres

W. Christl, A. Rahmel, M. Schütze: Behavior of Oxide Scales on 2.25Cr-1Mo Steel During Thermal Cycling. II. Scales Grown in Water Vapor; Oxidation of Metals 31 (1989) 35
A. Zeller, F. Dettenwanger, M. Schütze: Influence of Water Vapor on the Creep Behaviour of TiAl; in "Gamma Titanium Aluminides 1999", Hrsg. Y.-W. Kim et al., TMS, Warrendale (1999) 761-768
A. Zeller, F. Dettenwanger, M. Schütze: Influence of Water Vapour on the Oxidation Behaviour of TiAl at 700 and 750°C; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/31, DECHEMA, Frankfurt am Main (1999)
F. Dettenwanger, M. Schorr, J. Ellrich, T. Weber, M. Schütze: The Influence of Si, W and Water Vapour on the Oxidation Behaviour of 9Cr Steels; in "Proceedings of Corrosion 2001", NACE, Houston (2001) 01151/1-8
F. Dettenwanger, M. Schorr, J. Ellrich, T. Weber, M. Schütze: The influence of water vapour and silicon on the long term oxidation behaviour of 9Cr Steels; in "Lifetime modelling of high temperature corrosion processes", Hrsg. M. Schütze, W.J. Quadakkers, J.R. Nicholls, Maney Publ., London (2001) 206-219
A. Zeller, F. Dettenwanger, M. Schütze: Influence of water vapour on the creep and fatigue properties of TiAl; Intermetallics 10 (2002) 33-57
A. Zeller, F. Dettenwanger, M. Schütze: Influence of water vapour on the oxidation behaviour of titanium aluminides; Intermetallics 10 (2002) 59-72
M. Schütze, D. Renusch, M. Schorr: Parameters determining the breakaway oxidation behaviour of ferritic-martensitic 9% Cr steels in environments containing H₂O; Corrosion engineering, science and technology 39 (2004) 157-166
M. Schütze, M. Schorr, D. Renusch, A. Donchev, J. Vossen: The role of alloy composition, environment and stresses for the oxidation resistance of modern 9% Cr steels for fossil power stations; Materials Research 7 (2004) 111-123
A. Donchev, H. Fietzek, V. Kolarik, D. Renusch, M. Schütze: The effect of water vapor in increasing growth stresses in the oxide scale on martensitic steam plant alloys; Materials at High Temperatures 22 (2005) 139-146
M. Schütze, D. Renusch, M. Schorr: Chemical-mechanical failure of oxide scales on 9% Cr steels in air with H₂O; Materials at High Temperatures 22 (2005) 113-120
D. Renusch, M. Schütze: Experience with the use of the acoustic emission technique for monitoring scale failure in wet and dry environments; Materials at High Temperatures 22 (2005) 35-45
K. Yanagihara, D. Renusch, M. Röhrig, M. Schütze: Effect of Cr Content and Water Vapor on Fracture Behavior of the Scales Formed on Fe and Fe-Cr Alloy; Materials Science Forum 522-523 (2006) 497
I.G. Wright, M. Schütze, P.F. Tortorelli, R.B. Dooley: Towards improved prediction of scale exfoliation from steam tubes; Materials at High Temperatures 24 (2007) 265-274
B. Iwanschitz, J. Sfeir, A. Mai, M. Schütze: Degradation of SOFC Anodes upon Redox Cycling: A Comparison Between Ni/YSZ and Ni/CGO; Journal of The Electrochemical Society 157 (2010) B269-B278
M. Schütze, R.-U. Husemann, A. Donchev, G. Schmidt, M. Röhrig, S. Gansler: Korrosionsverhalten verschiedener Werkstoffe unter Oxyfuelbedingungen; VDI-Berichte 2102 (2010) 53-80

Heat-resisting Steels

J. Barbehön, A. Rahmel, M. Schütze: Behavior of the Scale on a 9.5Cr Steel under Cyclical Deformation of the Base Metal; Oxidation of Metals 30 (1988) 85
W. Christl, A. Rahmel, M. Schütze: Behavior of Oxide Scales on 2.25Cr-1Mo Steel During Thermal Cycling. I. Scales Formed in Oxygen and Air; Oxidation of Metals 31 (1989) 1
W. Christl, A. Rahmel, M. Schütze: Behavior of Oxide Scales on 2.25Cr-1Mo Steel During Thermal Cycling. II. Scales Grown in Water Vapor; Oxidation of Metals 31 (1989) 35
B. Glaser, M. Schütze, F. Vollhardt: Auswertung von Daten zum H₂S-Angriff auf Stähle bei verschiedenen Temperaturen und Konzentrationen; Chem. Ing. Techn. 63 (1991) 634
M. Schulte, M. Schütze: The Behaviour of Protective Sulfide Scales on Various Steels in H₂S-Containing Atmospheres during Temperature Changes; in "Progress in the Understanding and Prevention of Corrosion", Hrsg. J.M. Costa, A.D. Mercer, The Institute of Materials, London (1993) 750
M. Walter, M. Schütze, A. Rahmel: Behavior of Oxide Scales on 12Cr-1Mo Steel During Thermal Cycling; Oxidation of Metals 39 (1993) 389-410
M. Schütze, M. Nöth: The Sulfidation Resistance of Several Fe- and Ni-Base Alloys and of Two Intermetallics in Atmospheres Containing H₂S at 400-700ºC; Proc. 13th ICC, Australasian Corrosion Association, Melbourne (1996) 1534-1542
J.P.T. Vossen, M. Schütze: Isothermal and Thermocyclic Oxidation Behaviour of Heat-resistant Chromium Containing Steels in Air at 650ºC; Proc. EUROCORR '96, Bd. III, Paper OR 11 Centre Français de l'Anticorrosion/Société de Chimie Industrielle, Paris 1996
J.P.T. Vossen, M. Schütze: Limits for the Recovery of Chromium Oxide Scales on Heat-resistant Stainless Steels in Air With and Without Superimposed Mechanical Load at 650°C; Proc. Int. Conf. Corrosion-Deformation Interactions (CDI), Bd. IV, Paper P 40 Centre Français de l'Anticorrosion/Société de Chimie Industrielle, Paris 1996
J.P.T. Vossen, P. Gawenda, K. Rahts, M. Röhrig, M. Schorr, M. Schütze: Limits of the Oxidation Resistance of Several Heat-resistant Steels under Isothermal and Cyclic Oxidation as well as under Creep in Air at 650°C; Materials at High Temperatures 14 (1997) 387-401
M. Schulte, A. Rahmel, M. Schütze: The Sulfidation Behavior of Several Commercial Ferritic and Austenitic Steels; Oxidation of Metals 49 (1998) 33-70
M. Schulte, M. Schütze: The Role of Scale Stresses in the Sulfidation of Steels; Oxidation of Metals 51 (1999) 55-77
F. Dettenwanger, M. Schorr, J. Ellrich, T. Weber, M. Schütze: The Influence of Si, W and Water Vapour on the Oxidation Behaviour of 9Cr Steels; in "Proceedings of Corrosion 2001", NACE, Houston (2001) 01151/1-8
F. Dettenwanger, M. Schorr, J. Ellrich, T. Weber, M. Schütze: The influence of water vapour and silicon on the long term oxidation behaviour of 9Cr Steels; in "Lifetime modelling of high temperature corrosion processes", Hrsg. M. Schütze, W.J. Quadakkers, J.R. Nicholls, Maney Publ., London (2001) 206-219
M. Schütze, D. Renusch, M. Schorr: Parameters determining the breakaway oxidation behaviour of ferritic-martensitic 9% Cr steels in environments containing H₂O; Corrosion engineering, science and technology 39 (2004) 157-166
M. Schütze, M. Schorr, D. Renusch, A. Donchev, J. Vossen: The role of alloy composition, environment and stresses for the oxidation resistance of modern 9% Cr steels for fossil power stations; Materials Research 7 (2004) 111-123
G. Wright, M. Schütze, S.R. Paterson, P.F. Tortorelli, R.B. Dooley: Progress in prediction and control of scale exfoliation on superheater and reheater alloys; Proc. EPRI International Conference on Boiler Tube and HRSG Tube Failures and Inspections, San Diego (2004)
A. Donchev, H. Fietzek, V. Kolarik, D. Renusch, M. Schütze: The effect of water vapor in increasing growth stresses in the oxide scale on martensitic steam plant alloys; Materials at High Temperatures 22 (2005) 139-146
M. Schütze, D. Renusch, M. Schorr: Chemical-mechanical failure of oxide scales on 9% Cr steels in air with H₂O; Materials at High Temperatures 22 (2005) 113-120
M. Schütze, E. Berghof-Hasselbächer, J.J. Hoffman: Development of an atlas of microstructures for the latest heat-resistant cast alloys; in "Proceedings of Corrosion 2007", NACE, Paper 07425/1-11
E. Berghof-Hasselbächer, P. Gawenda, M. Schorr, M. Schütze, J.J. Hoffman: Atlas of Microstructures; Materials Technology Institute, St. Louis (2008)
E. Berghof-Hasselbächer, M. Schorr, P. Gawenda, M. Schütze, J.J. Hoffman: Entwicklung eines Mikrostrukturatlanten für die neuesten hitzebeständigen Schleudergusswerkstoffe; Praktische Metallographie 45 (2008) 441-454
J. Kalivodová, D. Baxter, M. Schütze: Corrosion behaviour of boiler steels, coatings and welds in flue gas environments; Materials and Corrosion 59 (2008) 367-373
G. Kunschert, H.-P. Martinz, M. Schütze: Investigation of Oxide-Nucleation on ferritic FeCr Interconnect Alloys for Solid Oxide Fuel Cells exposed to Anode and Cathode Gases at 850°C; Materials Science Forum 559-598 (2008) 779-787
V. Vokál, V. Rohr, M.J. Pomeroy, M. Schütze: Corrosion of alloys and their diffusion aluminide coatings by KCl:K2SO₄ deposits at 650°C in air; Materials and Corrosion 59 (2008) 374-379

Investigation Methods

K.-H. Döhle, A. Rahmel, M. Schmidt, M. Schütze: Two Different Test Rigs for Creep Experiments in Aggressive Environments; in "Corrosion and Mechanical Stress at High Temperatures", Hrsg. V. Guttmann, M. Merz, Applied Science Publishers, London (1981) 441
J. Barbehön, K.-H. Döhle, M. Schütze: Meßdatenerfassung mit Hilfe des Personalcomputers bei Langzeitversuchen im Hochtemperaturwerkstoffprüflabor; Computer-Anwendung im Labor 3 (1984) 222
U. Bruch, K. Döhle, J. Pütz, A. Rahmel, M. Schütze, K.D. Schuhmacher: Comparison of the Corrosion Behaviour of Different High Temperature Alloys with and without Superimposed Creep Deformation in an Artificial Steam Reformer Atmosphere; in "Metallic Corrosion 1984", Bd. III, National Research Council Canada, Toronto (1984) 325
M. Schütze, J. Barbehön, K.-H. Döhle: Automatisierte Meßdatenerfassung mit Hilfe des Personalcomputers bei der Ermittlung von Hochtemperatur-Festigkeitskennwerten; in "Werkstoffprüfung 1984", DVM, Berlin (1985) 167
W. Christl, A. Rahmel, M. Schütze: Application of the Acoustic Emission Technique for the Detection of Oxide Scale Cracking during Thermal Cycling; Materials Science and Engineering 87 (1987) 289-293
M. Schütze, K. Döhle, H. Fellmann: Untersuchung und Bewertung des Verhaltens von Hochtemperaturwerkstoffen unter gleichzeitiger thermisch-chemisch-mechanischer Belastung; in "Werkstoffprüfung 1987", DVM, Berlin (1987) 23
R. Luger, B. Genswürger-Geerißen, F. Petri, D. Puppel, M. Schütze: Transmissionselektronenmikroskopische Untersuchungen zum Ausscheidungsverhalten von CuNi10(Fe)-Legierungen; Z. Metallkunde 79 (1988) 259
M. Schütze: Ein auf dem Verständnis der Mechanismen basierendes Konzept zur Prüfung der Hochtemperaturkorrosionsbeständigkeit unter mechanischer Beanspruchung; in "Werkstoffprüfung 1988", DVM, Berlin (1988) 419
L. Hodulak, M. Schütze: Rechnerprogramm für PC zum Nachweis der Tolerierbarkeit von Fehlern für Komponenten des chemischen Apparatebaus; Mat.-wiss. u. Werkstofftech. 20 (1989) 236
B. Glaser, K. Rahts, M. Schorr, M. Schütze: Nachweis von Chloriden in metallischen Werkstoffen bei Hochtemperaturkorrosion; Sonderbände der Praktischen Metallographie 25 (1994) 75-84
S.R.J. Saunders, M.M. Nagl, M. Schütze: Measurement Methods for the Determination of Fracture Strain; Mater. High Temp. 12 (1994) 103-109
M. Schütze: Hochtemperaturkorrosion und mechanische Beanspruchung; in "Korrosion verstehen - Korrosionsschäden vermeiden", Hrsg. H. Gräfen, A. Rahmel, Verlag Irene Kuron, Bonn (1994) 402-410
K. Rahts, M. Schorr, M. Schütze, M. Schmitz-Niederau: Darstellung von Oxidschichten und Gefüge von TiAl-Legierungen aus Hochtemperaturversuchen; Praktische Metallographie 27 (1995) 561-565
C. Lang, M. Schütze: TEM Investigations of the Early Stages of TiAl Oxidation; Oxidation of Metals 46 (1996) 255-285
C. Bruns, M. Schütze: Messung der Haftfestigkeit von Deckschichten mittels Schallemissionsanalyse; Berichtsband 58 "Statusberichte zur Entwicklung und Anwendung der Schallemissionsanalyse", Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. Berlin (1997) 235-237
K. Rahts, M. Nöth, M. Schulte, M. Schorr, P. Gawenda, M. Schütze: Untersuchungen an Sulfidschichten verschiedener Hochtemperaturwerkstoffe aus thermischer Beanspruchung in H₂S-haltiger Atmosphäre; Sonderbände der Praktischen Metallographie 28 (1997) 229-236
M. Schütze, C. Bruns: Stresses and Adhesion of Surface Scales; in "Corrosion-Deformation Interactions", Hrsg. T. Magnin, EFC-Publ. No. 21, The Institute of Materials, London (1997) 308-318
K. Rahts, M. Schorr, C. Schwalm, M. Schütze: Untersuchungen über den Einfluß von Chlor bei der Hochtemperaturoxidation; Praktische Metallographie 29 (1998) 305-311
F. Dettenwanger, H. Echsler, C. Bruns, M. Schütze: Investigation of Damage Mechanisms in Thermal Barrier Coatings by Acoustic Emission; in "Elevated Temperature Coatings: Science and Technology III", Hrsg. J.M. Hampikian, N.B. Dahotre, TMS, Warrendale (1999)
K. Rahts, M. Schorr, C. Schwalm, M. Schütze: Wasserfreie Präparationsmethode zum Nachweis von Chloriden bei der Hochtemperaturoxidation in chlorhaltigen Atmosphären; Praktische Metallographie 36 (1999) 86-97
G. Schumacher, F. Dettenwanger, M. Schütze, J.D. Sunderkötter, M.F. Stroosnijder: TEM-Investigations of Oxidized Y-implanted PM Chromium; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/30, DECHEMA, Frankfurt am Main (1999)
E. Berghof-Hasselbächer, M. Schütze: Ein alternatives Schliffpräparationsverfahren zur Verbesserung der optischen Darstellung und Differenzierung nichtmetallischer Schichten gegenüber dem Einbettmittel; Sonderbände der Praktischen Metallographie 31 (2000) 319-325
G. Schumacher, F. Dettwanger, M. Schütze, A. Iberl, D. Reil: XRD Investigations of the Phosphorus Effect on the Oxidation of TiAl Alloys by High-Resolution Methods; Oxidation of Metals 54 (2000) 317-337
C. Bruns, M. Schütze: Investigation of the Mechanical Properties of Oxide Scales on Nickel and TiAl; Oxidation of Metals 55 (2001) 35-68
M. Schütze, S. Ito, W. Przybilla, H. Echsler, C. Bruns: Test Methods and Data on the Mechanical Properties of Protective Oxide Scales; Materials at High Temperatures 18 (2001) 39-50
E. Berghof-Hasselbächer, H.-E. Bühler, O. Greven, M. Schorr, J. Schürhoff, M. Schütze: Untersuchungen zum Bauteilversagen von Rostsystemen bei der Restholzverbrennung; Praktische Metallographie 39 (2002) 369-386
E. Berghof-Hasselbächer, C. Rosado Sainz-Rosas, M. Schütze: Korrosionsschutzschichten gegen Metal Dusting Angriff; Sonderbände der Praktischen Metallographie 34, Hrsg. G. Petzow, Werkstoff-Informationsgesellschaft, Frankfurt am Main (2002) 271-281
E. Berghof-Hasselbächer, C. Rosado Sainz-Rozas, M. Schütze: Korrosionsschutzschichten gegen Metal Dusting Angriff; Praktische Metallographie 40 (2003) 407-419
E. Berghof-Hasselbächer, A. Littner, M. Schütze, M. Schorr, P. Gawenda: Charakterisierung von Al- und PtAl-Diffusion Coatings auf Ni-Basis-Superlegierungen; Sonderbände der Praktischen Metallographie 35 (2004) 325-336
E. Berghof-Hasselbächer, E. Nicolas, V. Rohr, M. Schütze: Bildanalytische Schichtdickenbestimmung an Al-Diffusion Coatings; Sonderbände der praktischen Metallographie 36 (2004) 451-457
E. Berghof-Hasselbächer, M. Schorr, P. Gawenda, M. Schütze: Potentiale und Grenzen der Interferenzschichten-Metallographie bei der Charakterisierung von Karbidtypen am Beispiel hitzebeständiger Schleudergusswerkstoffe; Sonderbände der praktischen Metallographie 37 (2005) 173-179
D. Renusch, M. Schütze: Experience with the use of the acoustic emission technique for monitoring scale failure in wet and dry environments; Materials at High Temperatures 22 (2005) 33-45
E. Berghof-Hasselbächer, E. Nicolas, V. Rohr, M. Schütze: Bildanalytische Schichtdickenbestimmung an Al-Diffusion Coatings; Praktische Metallographie 43 (2006) 127-142
B. Isecke, M. Schütze, H.-H. Strehblow: Measurement methods for materials performance - corrosion; Springer Handbook of Materials Measurement Methods, Hrsg. H. Czichos, T. Saito, L. Smith, Springer-Verlag (2006) 611-684
M. Schütze, M. Malessa: Reliable assessment of high temperature oxidation resistance by the development of a comprehensive code of practice for thermocycling oxidation testing - European COTEST project; Materials and Corrosion 57 (2006) 5-13
E. Berghof-Hasselbächer, M. Schorr, P. Gawenda, M. Schütze, J.J. Hoffman: Entwicklung eines Mikrostrukturatlanten für die neuesten hitzebeständigen Schleudergusswerkstoffe; Sonderbände der Praktischen Metallographie 39 (2007) 81-88
M. Schütze, E. Berghof-Hasselbächer, J.J. Hoffman: Development of an atlas of microstructures for the latest heat-resistant cast alloys; in "Proceedings of Corrosion 2007", NACE, Paper 07425/1-11
E. Berghof-Hasselbächer, S. Diliberto, P. Gawenda, P.J. Masset, G. Schmidt, M. Schütze: Metallographische Untersuchungen der Mikrostrukturen von technischen TiAl-Legierungen; Sonderbände der praktischen Metallographie 40 (2008) 117-124
E. Berghof-Hasselbächer, P. Gawenda, M. Schorr, M. Schütze, J.J. Hoffman: Atlas of Microstructures; Materials Technology Institute, St. Louis (2008)
E. Berghof-Hasselbächer, M. Schorr, P. Gawenda, M. Schütze, J.J. Hoffman: Entwicklung eines Mikrostrukturatlanten für die neuesten hitzebeständigen Schleudergusswerkstoffe; Praktische Metallographie 45 (2008) 441-454
E. Berghof-Hasselbächer, P.J. Masset, D. Texier, G. Schmidt, P. Gawenda, M. Jusek, M. Schütze: Mikrostrukturen von NiAl_(1-x)Hf_(x)-Legierungen (x=0…0,2); Sonderbände der Praktischen Metallographie 41 (2009) 113-119
I. Teliban, C. Thede, S. Chemnitz, C. Bechtold, W.J. Quadakkers, M. Schütze, E. Quandt: Magnetic moment investigation by frequency mixing techniques; Review of Scientific Instruments 80 (2009) 115106
E. Berghof-Hasselbächer, P. Gawenda, P.J. Masset, G. Schmidt, M. Schütze, S. Diliberto: Metallographische Untersuchungen der Mikrostrukturen von technischen TiAl-Legierungen; Praktische Metallographie 47 (2010) 65-83

Corrosion and Corrosion Protection in Liquid Media

K.H. Büttgen, D. da Silva Rosa, B. du Bois, P. Gawenda, A. Rahmel, K. Rahts, M. Schütze: Stimulation of aqueous corrosion by MoS2 deposits; Materials and Corrosion 49 (1998) 505-511
T. Hollstein, T. Graas, K. Bundschuh, M. Schütze: Das Korrosionsverhalten unterschiedlicher Siliciumnitride in wäßrigen Lösungen; Keramische Zeitschrift 50 (1998) 416-421
H.-Q. Nguyen, W. Fürbeth, M. Schütze: Nano-enamel: a new way to produce glass-like protective coatings for metals; Materials and Corrosion 53 (2002) 772-782
S. Benfer, W. Fürbeth, M. Schütze: Nanopartikelbasierte Schichten für die Emailreparatur; CAV Chemie-Anlagen + Verfahren (5/2006) 44-46
F. Feil, W. Fürbeth, M.Schütze: Kleine Teilchen auf leichtem Metall - Nanopartikel-basierte anorganische Schutzschichten für Magnesiumwerkstoffe; Metalloberfläche 60 (11) (2006) 38-41
F. Feil, W. Fürbeth, M.Schütze: Nanopartikel-basierte anorganische Schutzschichten für Magnesiumwerkstoffe; Tagungsband Oberflächentage 2006 (CD), Bonn (2006)

Role of Microstructure

B. Reppich, H. Bügler, R. Leistner, M. Schütze: Application of the Microstructural Concept of Creep and Rupture Life Time to a γ'-Precipitating Ni-Base Alloy I. Yielding and Creep Behaviour; in "Creep and Fracture of Engineering Materials and Structures", Hrsg. B. Wilshire, D. Owen, Pineridge Press, Swansea (1984) 279
R. Luger, B. Genswürger-Geerißen, F. Petri, D. Puppel, M. Schütze: Transmissionselektronenmikroskopische Untersuchungen zum Ausscheidungsverhalten von CuNi10(Fe)-Legierungen; Z. Metallkunde 79 (1988) 259
R. Luger, M. Schütze: Einfluß des Fe-Gehalts und der Auslagerungszeit auf mechanische, elektrische und magnetische Eigenschaften der Legierung CuNi10(Fe); Mat.-wiss. u. Werkstofftech. 20 (1989) 60
G. Luxenburger, M. Schütze: Einfluß der Carbidstruktur auf das Kriechverhalten der hitzebeständigen Edelstahl-Gußlegierung HK40; Z. Metallkunde 82 (1991) 430
G. Schumacher, F. Dettenwanger, M. Schütze, J.D. Sunderkötter, M.F. Stroosnijder: TEM-Investigations of Oxidized Y-implanted PM Chromium; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/30, DECHEMA, Frankfurt am Main (1999)
E. Berghof-Hasselbächer, P. Gawenda, M. Schorr, M. Schütze, J.J. Hoffman: Atlas of Microstructures; Materials Technology Institute, St. Louis (2008)
H. Latreche, G. Bozzolo, P.J. Masset, T. Weber, M. Schütze: Measurements of the coefficient of thermal expansion (CTE) of NiAlMo alloys and comparison with modelling predictions; Materials Science and Engineering: A 527/21-22 (2010) 5837

Mechanical High Temperature Properties Without Corrosion

B. Reppich, H. Bügler, R. Leistner, M. Schütze: Application of the Microstructural Concept of Creep and Rupture Life Time to a γ'-Precipitating Ni-Base Alloy I. Yielding and Creep Behaviour; in "Creep and Fracture of Engineering Materials and Structures", Hrsg. B. Wilshire, D. Owen, Pineridge Press, Swansea (1984) 279
L. Hodulak, M. Schütze: Rechnerprogramm für PC zum Nachweis der Tolerierbarkeit von Fehlern für Komponenten des chemischen Apparatebaus; Mat.-wiss. u. Werkstofftech. 20 (1989) 236
G. Luxenburger, M. Schütze: Einfluß der Carbidstruktur auf das Kriechverhalten der hitzebeständigen Edelstahl-Gußlegierung HK40; Z. Metallkunde 82 (1991) 430
K. Rüdinger, M. Schütze: Beitrag zum Zeitstandverhalten von Titan für die Anwendung im chemischen Apparatebau; Mat.-wiss. u. Werkstofftechn. 22 (1991) 1

Nanotechnology

W. Fürbeth, H.-Q. Nguyen, F. Dettenwanger, M. Schütze: Development of new corrosion resistant coatings for light metals by sintering of nanopowders; Proc. Eurocorr 2000 (CD), London
W. Fürbeth, H.-Q. Nguyen, F. Dettenwanger, M. Schütze: New developments for corrosion resistant coatings for light metals and steel based on chemical nanotechnology; Proc. EUROCORR 2001 (CD) Associazione Italiana di Metallurgia, Milano (2001)
H.-Q. Nguyen, W. Fürbeth, M. Schütze: Nano-enamel: a new way to produce glass-like protective coatings for metals; Materials and Corrosion 53 (2002) 772-782
W. Fürbeth, H.-Q. Nguyen, M. Schütze: Development of new corrosion resistant coatings based on chemical nanotechnology; Proc. Int. Symposium "Corrosion Science in the 21st century", UMIST, Manchester (2003) (CD), The Journal of Corrosion Science and Engineering, Vol. 6 (2003)
W. Fürbeth, H.-Q. Nguyen, M. Schütze: Nanoenamel - new technologies for functional coatings; ACHEMA-Magazine/ Special edition of Process, Vogel Verlag (2003) 74-75
W. Fürbeth, H.-Q. Nguyen, M. Schütze: Nanopulver-Schichten als Korrosionsschutz für Leichtmetallegierungen; Tagungsband 1. KKF-Kolloquium Gemeinsame Forschung im Korrosionsschutz - Problemlösungen für den metallischen Leichtbau, Januar 2003, GfKORR e.V., Frankfurt (2003)
W. Fürbeth, H.-Q. Nguyen, M. Schütze: Neue Korrosionsschutzschichten für Metalle auf der Basis chemischer Nanotechnologie; Proc. Oberflächentage 2003, DGO, Düsseldorf (2003)
W. Fürbeth, H.-Q. Nguyen, M. Schütze: Kleine Ursache mit großer Wirkung: Neue Korrosionsschutzschichten für Metalle auf Basis chemischer Nanotechnologie; Metalloberfläche 58 (2004) 31-36
S. Benfer, W. Fürbeth, M. Schütze: Emailreparatur mit nanopartikulären Schichten; Mitteilungen des Deutschen Emailverbandes e.V. 53/5 (2005) 74-83
S. Benfer, W. Fürbeth, M. Schütze: Entwicklung von nanopartikelbasierten Schichten für die Emailreparatur; Tagungsband 6. Industriefachtagung Oberflächen- und Wärmebehandlungstechnik & 8. Werkstofftechnisches Kolloquium, Chemnitz (2005)
W. Fürbeth, S. Benfer, M. Schütze: Repair of technical enamels through nanotechnology; Proc. EUROCORR 2005, Lissabon (2005)
W. Fürbeth, H.-Q. Nguyen. M. Schütze: Nanopartikelbasierte Korrosionsschutzschichten für Leichtmetalle; Tagungsband Thüringer Grenz- und Oberflächentage, Jena (2005)
W. Fürbeth, H.-Q. Nguyen, M. Schütze: Neuartige Korrosionsschutzschichten für Metalle auf der Basis oxidischer Nanopartikel; Tagungsband 6. Wörlitzer Workshop Funktionelle Schichten, Europäische Forschungsgesellschaft Dünne Schichten e.V., Dresden (2005)
W. Fürbeth, M. Schütze: Novel corrosion protective coatings based on nanomaterials; Report Nato-RTO Specialist Meeting AVT-122 Nanomaterials Technology for Military Vehicle Structural Applications, Granada (2005)
S. Benfer, W. Fürbeth, M. Schütze: Email vor Ort reparieren; cav - Chemie-Anlagen + Verfahren (2006) (5) 44-46
F. Feil, W. Fürbeth, M.Schütze: Kleine Teilchen auf leichtem Metall - Nanopartikel-basierte anorganische Schutzschichten für Magnesiumwerkstoffe; Metalloberfläche 60 (11) (2006) 38-41
F. Feil, W. Fürbeth, M.Schütze: Nanopartikel-basierte anorganische Schutzschichten für Magnesiumwerkstoffe; Tagungsband Oberflächentage, Bonn (2006)

Review Articles

M. Schütze: Fundamentals of High Temperature Corrosion; in "Corrosion and Environmental Degradation", Hrsg. R.W. Cahn et al., Wiley-VCH (2000) 67-130
W. Fürbeth, M. Schütze: Progress in corrosion protection as a requirement for technical progress; Materials and Corrosion 60 (2009) 481-494
M. Schütze: Konzepte für die Entwicklung von Schutzschichten für aggressive Hochtemperaturumgebungen; in "Dampferzeugerkorrosion", Saxonia Standortentwicklungs- und -verwaltungsgesellschaft mbH, Freiberg/Sachsen (2009) 169-188
M. Schütze, W. Fürbeth: Innovative Entwicklungen im Bereich Korrosionsschutz von Metallen; Tagungsband 5. Thüringer Grenz- und Oberflächentage, Innovent e.V., Jena (2009) 65-73

Books

M. Schütze: Die Korrosionsschutzwirkung oxidischer Deckschichten unter thermisch-chemisch-mechanischer Werkstoffbeanspruchung; Materialkundlich-Technische Reihe, Vol. 10, Hrsg. G. Petzow & F. Jeglitsch, Gebr. Borntraeger Verlag, Berlin 1991
H.J. Grabke, M. Schütze (Hrsg.): Oxidation of Intermetallics; Wiley-VCH, Weinheim 1997
M. Schütze: Protective Oxide Scales and Their Breakdown; Series on Corrosion and Protection, Vol. 1, Hrsg. D.R. Holmes, John Wiley and Sons, Chichester 1997
M. Schütze, W.J. Quadakkers (Hrsg.): Cyclic Oxidation of High Temperature Materials; The Institute of Materials, London 1999
G. Schmitt, M. Schütze (Hrsg.): Solution of Corrosion Problems in Advanced Technologies; DECHEMA, Frankfurt am Main 1999
M. Schütze (Hrsg.): Corrosion and Environmental Degradation; Bd. 19 der Reihe "Materials Science and Technology", Hrsg. R.W. Cahn et al., Wiley-VCH, Weinheim 2000
M. Schütze, W.J. Quadakkers, J.R. Nicholls (Hrsg.): Lifetime Modelling of High Temperature Corrosion Processes; Maney Publishing, London 2001
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 1: Sodium Hydroxide, Mixed Acids; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2005
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 2: Hydrochloric Acid, Nitric Acid; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2005
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 3: Hypochlorites, Phosphoric Acid; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2005
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 4: Drinking Water, Waste Water (Municipal), Waste Water (Industrial); DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2005
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 5: Carbonic Acid, Chlorine Dioxide, Seawater; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2005
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 6: Atmosphere, Industrial Waste Gases; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2006
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 7: Sodium Chloride; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2006
H.J. Grabke, M. Schütze (Hrsg.): Corrosion by carbon and nitrogen: Metal dusting, carburisation and nitridation; Woodhead Publishing, Cambridge 2007
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 8, Part A: Chlorinated Hydrocarbons - Chloromethanes; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2007
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 8, Part B: Chlorinated Hydrocarbons - Chloroethanes, Alkanols; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2007
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 9: Potassium Hydroxide, Ammonium and Ammonium Hydroxide; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2007
M. Schütze, M. Malessa (Hrsg.): Standardisation of thermal cycling exposure testing; Woodhead Publishing, Cambridge 2007
E. Berghof-Hasselbächer, P. Gawenda, M. Schorr, M. Schütze, J.J. Hoffman: Atlas of Microstructures; Materials Technology Institute, St. Louis 2008
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 10: Sulfur Dioxide, Sodium Sulfate; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2008
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 11: Sulfuric Acid; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2008
M. Schütze, W.J. Quadakkers (Hrsg.): Novel approaches to improving high temperature corrosion resistance; EFC no. 47, Woodhead, Cambridge 2008
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 12: Ferrous Chlorides; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2009
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 13: Index; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2009
M. Schütze, D. Wieser, R. Bender (Hrsg.): Corrosion Resistance of Aluminium and Aluminium Alloys; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2010

General Press Releases

C. Hirche, M. Schütze: Werkstoffinnovationen öffnen den Weg zu hochleistungsfähigen neuen Produkten; Frankfurter Allgemeine Zeitung, 7. Dezember 1992
P.P. Schepp, M. Schütze: Messen, Tagungen, Veranstaltungen - auf den Erfahrungsaustausch kommt es bei Werkstoffen an; Frankfurter Allgemeine Zeitung, 25. Januar 1993
M. Schütze: Hitze läßt neue Werkstoffe kalt; Chemische Industrie 10 (1993) 38-40
M. Schütze: Aus dem Weltraum auf die Erde geholt; Chemische Industrie 12 (1995) 39-40
M. Schütze: Korrosion in der Hochtemperaturtechnik; Spektrum der Wissenschaft Juli (1998) 100-108
M. Schütze: Beschichtete Stahlbehälter halten aggressiven Medien stand; Handelsblatt, 21. April 1999
M. Schütze: Korrosion - Vergangenheit, Heute und Zukunft; Chemie Ingenieur Technik 75 (2003) 1534-1538
M. Schütze: Chemiewerkstoffe; Werkstoffe in der Fertigung (2005) 4
M. Schütze: Was Menschen bewegt, die etwas bewegen; CITplus 1/2 (2006) 6

2010

S. Benfer, C. Siemers, J. Rösler, W. Fürbeth
Influence of La-Content and Microstructure on the Corrosion Properties of a New Free Machining Titanium Alloy
ECS Transactions 25(37) (2010) 3-15
doi: 10.1149/1.3407543F .

U. Harm, W. Fürbeth, K. Jüttner, K.M. Mangold
Quervernetzte Molekülfilme für den Korrosionsschutz verzinkter Stahloberflächen
in: Dr. R. Suchentrunk (Hrsg.), Jahrbuch Oberflächentechnik 2010 - Band 66, Eugen G. Leuze Verlag, Bad Saulgau (2010) 149-157

R. Stadler, L. Wei, W. Fürbeth, M. Grooters, A. Kuklinski
Influence of bacterial exopolymers on cell adhesion of Desulfovibrio vulgaris on high alloyed steel: Corrosion inhibition by extracellular polymeric substances (EPS)
Materials and Corrosion 61 (2010) 1008-1016

W. Fürbeth
Development or modification of corrosion protective coatings for light metals using oxidic nanoparticles
Proc. Intern. Conf. on Corrosion Mitigation and Protection Technologies, Egyptian Corrosion Society, Kairo (2010)

F. Feil, W. Fürbeth
Thermally stable multilayer coatings for the corrosion protection of magnesium alloys
in: "High Performance Coatings for Automotive and Aerospace Industries" (Ed. Prof. Dr. A. S. Hamdy Makhlouf) 2010, Chapter 2, 47-56

Feil, W. Fürbeth
Nanopartiklel-basierte Korrosionsschutzschichten für Leichtmetalle
in: Dr. R. Suchentrunk (Hrsg.), Jahrbuch Oberflächentechnik 2010 - Band 66, Eugen G. Leuze Verlag, Bad Saulgau (2010) 176-187

F. Feil, W. Fürbeth
Thin, Nanoparticulate Coatings for the Improvement of the Corrosion and Passivation Behavior of AZ Magnesium Alloys
Advanced Materials Research, Light Weight Metal Corrosion and Modeling 2010, 138, 47-53.

F. Feil, W. Fürbeth
Multilayered, purely inorganic Coatings for the Corrosion Protection of Magnesium Alloys Proc. Asiapacific Interfinish 2010 (CD-ROM), Singapore (2010)

R. Stadler, M. Grooters, C. Janosch, A. Kuklinski, W. Sand, W. Fürbeth
Studies on the application of microbially produced polymeric substances as protecting layers against microbially influenced corrosion of iron and steel
Proc. CORROSION 2010, Nace, Houston/TX (2010)

T. Tesfu-Zeru, W. Fürbeth
Mikrostrukturorientierte Untersuchungen der Korrosionseigenschaften von Al/Al- und Al/Stahl-FSW-Verbindungen
Tagungsband DVS Congress 2010, Nürnberg (2010)

W. Fürbeth, D. Tabatabai, B. Tigges, S.K. Weidmann
Modified anodising processes for light metals based on the incorporation of nanoparticles or nanocapsules
Proc. EUROCORR 2010 (CD-ROM), DECHEMA e.V., Moskau (2010)

T. Tesfu-Zeru, C. Conrad, X. Lang, R. Noveva, G. Wagner, W. Fürbeth
Microstructure oriented fatigue and damage analysis of Al/Al and Al/steel friction stir weldings (FSW) considering corrosive effects
Proc. EUROCORR 2010 (CD-ROM), DECHEMA e.V., Moskau (2010)

F. Feil, W. Fürbeth
Thin, Nanoparticulate Coatings for the Improvement of the Corrosion and Passivation Behavior of AZ Magnesium Alloys
Proc. EUROCORR 2010 (CD-ROM), DECHEMA e.V., Moscow (2010)

S.K. Weidmann, W. Fürbeth, O. Yezerska, U. Sydow, M. Schneider
Modifizierung von Anodisierschichten auf Aluminiumwerkstoffen durch chemische Nanotechnologie
Galvanotechnik 101 (2010) 1728-1744

W. Fürbeth
Korrosion und Korrosionsschutz - eine Querschnittsdisziplin für den technischen Fortschritt
CITplus (2010), Heft 10, 43-44

2009

F. Feil, W. Fürbeth, M. Schütze
Purely inorganic coatings based on nanoparticles for magnesium alloys
Electrochimica Acta 54 (2009) 2478-2486; doi:10.1016/j.electacta.2008.07.050

S.K. Weidmann, W. Fürbeth, O. Yezerska, U. Sydow, M. Schneider
"Modifizierung von Anodisierschichten auf Aluminiumwerkstoffen durch chemische Nanotechnologie"
Dr. R. Suchentrunk (Hrsg.), Jahrbuch Oberflächentechnik 2009 - Band 65, Eugen G. Leuze Verlag, Bad Saulgau (2009) 206-222

M. Schneider, S.K. Weidmann, U. Sydow, O. Yezerska, W. Fürbeth
"Corrosion investigation on a modified PAA-process completed by chemical nanotechnology"
Proc. Vth Aluminium Surface Science and Technology ASST 2009, Leiden (2009)

W. Fürbeth, M. Schütze
"Progress in corrosion protection as a requirement for technical progress"
Materials and Corrosion 60 (2009) 481-494

F. Feil, W. Fürbeth
"Multilayered nanoparticulate coatings for the corrosion protection of magnesium alloys"
Proc. EUROCORR 2009 (CD-ROM), Nizza/F (2009)

R. Stadler, M. Grooters, A. Kuklinski, C. Janosch, W. Sand, W. Fürbeth
"Studies on the application of microbially produced polymeric substances as protecting layers against microbially influenced corrosion of iron and steel"
Proc. EUROCORR 2009 (CD-ROM), Nizza/F (2009)

D. Tabatabai, F. Feil, G. Grundmeier, P. Thissen, W. Fürbeth
"Self-healing coatings for corrosion protection of wrought magnesium alloys"
Proc. EUROCORR 2009 (CD-ROM), Nizza/F (2009)

F. Feil, W. Fürbeth
"Nanoparticle based multilayer coatings for the corrosion protection of magnesium alloys"
in: K.U. Kainer (Hrsg.), Magnesium, Wiley-VCH, Weinheim (2009) 851-857

D. Tabatabai, F. Feil, G. Grundmeier, P. Thissen, W. Fürbeth
"Self-healing anodizing coatings for corrosion protection of wrought magnesium alloys: incorporation of nanocontainers into growing anodizing layers"
in: K.U. Kainer (Hrsg.), Magnesium, Wiley-VCH, Weinheim (2009) 980-985

G. Grundmeier, P. Thissen, F. Feil, D. Tabatabai, W. Fürbeth
"Corrosion protection of magnesium alloys by nanostructured oxide films"
in: K.U. Kainer (Hrsg.), Magnesium, Wiley-VCH, Weinheim (2009) 1344-1349

P. Thissen, F. Feil, W. Fürbeth, D. Tabatabai, G. Grundmeier
"Formation and stability of self-assembly monolayers on AZ31"
in: K.U. Kainer (Hrsg.), Magnesium, Wiley-VCH, Weinheim (2009) 1357-1361

M. Schütze, W. Fürbeth
"Innovative Entwicklungen im Bereich Korrosionsschutz von Metallen"
Tagungsband 5. Thüringer Grenz- und Oberflächentage, Innovent e.V., Jena (2009) 65-73

E.M. Moustafa, O. Mann, W. Fürbeth, R. Schuster
"Electrochemical behaviour of iron in a third-generation ionic liquid: cyclic voltammetry and micromachining investigations"
ChemPhysChem 10 (2009) 3090-3096

2008

F. Feil, W. Fürbeth, M. Schütze
Nanoparticle based inorganic coatings for the corrosion protection of magnesium alloys
Surface Engineering 24 (2008) 198-203

R. Stadler, W. Fürbeth, K. Harneit, M. Grooters, M. Wöllbrink, W. Sand
First evaluation of the applicability of microbial extracellular polymeric substances for corrosion protection of metal substrates
Electrochimica Acta 54 (2008) 91-99

S. Benfer, W. Fürbeth, M. Schütze
Reparaturschichten auf der Basis chemischer Nanotechnologie für Schadstellen in Apparate-Emaillierungen
Mitteilungen des Deutschen Emailverbandes e.V. 56 (2008) 18-26

S. Benfer, W. Fürbeth, M. Schütze
New repair method for technical enamels based on sol-gel and sol-dispersion coatings
Materials and Corrosion 59 (2008) 167-174

S.K. Weidmann, W. Fürbeth, O. Yezerska, U. Sydow, M. Schneider
Nanoparticle based impregnation of anodic layers on aluminium alloys
in: J. Hirsch, B. Skrotzki, G. Gottstein, Aluminium alloys: their physical and mechanical properties, Vol. 2, Wiley-VCH, Weinheim (2008) 2119-2124

M. Schneider, U. Sydow, S.K. Weidmann, W. Fürbeth
Oxide tailoring for downstream modification by chemical nanotechnology to upgrade adhesive properties and corrosion protection of aluminium alloys
in: J. Hirsch, B. Skrotzki, G. Gottstein, Aluminium alloys: their physical and mechanical properties, Vol. 2, Wiley-VCH, Weinheim (2008) 2054-2059

S.K. Weidmann, W. Fürbeth, O. Yezerska, U. Sydow, M. Schneider
Anodic oxide tailoring followed by a nanoparticle based impregnation process to improve corrosion protection and adhesion properties of aluminium alloys
Proc. EUROCORR 2008 (CD-ROM), Edinburgh (2008)

S. Benfer, P. Jencus, C. Siemers, J. Rösler, W. Fürbeth
Corrosion properties of a new free machining titanium alloy
Proc. EUROCORR 2008 (CD-ROM), Edinburgh (2008)

R. Richter, W. Fürbeth, E. Moustafa, R. Schuster
Electrochemical micromachining of high alloyed steels in nonaqueous electrolytes using short voltage pulses
Proc. EUROCORR 2008 (CD-ROM), Edinburgh (2008)

2007

W. Fürbeth, H.Q. Nguyen, M. Schütze
Novel corrosion protective coatings for aluminium alloys and steels based on oxidic nanoparticles
International Journal of Materials Research 98 (2007) 589-596

W. Fürbeth
Nanotechnologie im Korrosionsschutz - Ansätze für neuartige Schutzschichten und Überzüge mit verbesserten Eigenschaften
DECHEMA-Tätigkeitsbericht 2006, DECHEMA e.V., Frankfurt am Main (2007), S. 13-19

F. Feil, W. Fürbeth, M. Schütze
Nanoparticulate protective coatings for magnesium alloys
Proc. EuroNanoForum, Düsseldorf (2007) 111-113

W. Fürbeth
Karl-Winnacker-Institut der DECHEMA e.V.: Neuartige Korrosionsschutzschichten durch Nanotechnologien
Hessen-Nanotech NEWS 2/2007, HA Hessen Agentur GmbH, Wiesbaden (2007), S. 5

R. Stadler, W. Fürbeth, K. Harneit, M. Grooters, M. Wöllbrink, W. Sand
Novel corrosion protection by microbial extracellular polymeric substances - Biofilm induced corrosion inhibition
Proc. BIOCORYS 2007, CEFRACOR, Paris/F (2007) BR-O-19

S. Benfer, W. Fürbeth, M. Schütze
Neuartige Reparaturmethode für Apparate-Emaillierungen auf der Basis chemischer Nanotechnologie
Tagungsband 4. Kolloquium Gemeinsame Forschung im Korrosionsschutz, Forschung für die Praxis: Nachhaltige Oberflächenschutzkonzepte - Innovative Entwicklungen, GfKORR e.V., Frankfurt am Main (2007) 46-56

F. Feil, W. Fürbeth, M. Schütze
Nanopartikel-basierte Schutzschichten für Magnesiumwerkstoffe mit hoher thermischer und mechanischer Stabilität
Tagungsband 4. Kolloquium Gemeinsame Forschung im Korrosionsschutz, Forschung für die Praxis: Nachhaltige Oberflächenschutzkonzepte - Innovative Entwicklungen, GfKORR e.V., Frankfurt am Main (2007) 57-64

S. Benfer, W. Fürbeth, M. Schütze
Nanoparticle based coatings as repair layers for technical enamels
Proc. EUROCORR 2007, Freiburg (2007)

F. Feil, W. Fürbeth, M. Schütze
Nanoparticulate protective coatings for magnesium alloys
Proc. EUROCORR 2007, Freiburg (2007)

R. Stadler, W. Fürbeth, K. Harneit, M. Groote, W. Sand
Novel corrosion protection by microbial extracellular polymeric substances (biofilm induced corrosion inhibition)
Proc. EUROCORR 2007, Freiburg (2007)

S.K. Weidmann, M. Schneider, W. Fürbeth
Modification of anodic layers on aluminium alloys
Proc. EUROCORR 2007, Freiburg (2007)

U. Harm, S. Hild, W. Fürbeth, K.M. Mangold, K. Jüttner
Novel protective coatings for steel based on a combination of self-assembled monolayers and conducting polymers
Proc. EUROCORR 2007, Freiburg (2007)

M. Grooters, K. Harneit, M. Wöllbrink, W. Sand, R. Stadler, W. Fürbeth
Novel steel corrosion protection by microbial extracellular polymeric substances (EPS) - biofilm-induced corrosion inhibition
Advanced Materials Research 20-21 (2007) 375-378

F. Feil, W. Fürbeth, M. Schütze
Protective coatings for magnesium alloys based on silicate nanoparticles
Proc. 15. Magnesium Abnehmer und Automotive Seminar, Aalen (2007)

F. Feil, W. Fürbeth, M. Schütze
Purely inorganic coatings based on nanoparticles for magnesium alloys
Proc. EURO-INTERFINISH 2007, Athen/GR (2007) O20, 132-139

2006

U. Harm, W. Fürbeth, K.M. Mangold, K. Jüttner
Neuartiges Primersystem für Eisen und Stahl mit Self-Assembled Monolayers (SAM) und leitfähigen Polymeren
Galvanotechnik 97 (2006) 676-681

S. Benfer, W. Fürbeth, M. Schütze
Email vor Ort reparieren - Nanopartikelbasierte Schichten ermöglichen einen Schutzschichtaufbau
CAV Chemie-Anlagen + Verfahren (5/2006) 44-46

W. Fürbeth
Corrosion protection by coatings based on nanotechnology
Proc. EUROCORR 2006, Maastricht (2006)

F. Feil, M. Schütze, W. Fürbeth
Nanopartikel-basierte anorganische Schutzschichten für Magnesiumwerkstoffe
Tagungsband Oberflächentage 2006, Bonn (2006)

W. Fürbeth, F. Feil, M. Schütze
Nanoparticle-based Inorganic Coatings for the Corrosion Protection of Magnesium Alloys
K.-U. Kainer (ed.), Magnesium, Wiley-VCH, Weinheim (2006) 828-833

F. Feil, W. Fürbeth, M. Schütze
Kleine Teilchen auf leichtem Metall - Nanopartikel-basierte anorganische Schutzschichten für Magnesiumwerkstoffe
Metalloberfläche 60(11) (2006) 38-41

2005

W. Fürbeth, U. Harm, K.-M. Mangold, K. Jüttner
Self-Assembled Monolayers (SAM) leitfähiger Polymere zum Korrosionsschutz von Eisen und Stahl
Tagungsband "Forschung für die Praxis - Innovativer Korrosionsschutz erhält Bauteile und Anlagen", 3. Kolloquium Gemeinsame Forschung im Korrosionsschutz, Gesellschaft für Korrosionsschutz e.V., Frankfurt am Main (2005)

W. Fürbeth
Innovative Korrosionsschutzschichten durch Nanotechnologie
Tagungsband 1. Korrosionsschutz-Symposium: Korrosionsschutz durch Beschichtungen in Theorie und Praxis, Technische Akademie Wuppertal e.V., Bochum (2005)

W. Fürbeth, H.Q. Nguyen, M. Schütze
Neuartige Korrosionsschutzschichten für Metalle auf der Basis oxidischer Nanopartikel
Tagungsband 6. Wörlitzer Workshop Funktionelle Schichten, Europäische Forschungsgesellschaft Dünne Schichten e.V., Dresden (2005)

S. Benfer, W. Fürbeth, M. Schütze
Emailreparatur mit nanopartikulären Schichten
Mitteilungen des Deutschen Emailverbandes e.V. 53 (2005) 74-83

W. Fürbeth, S. Benfer, M. Schütze
Repair of technical enamels through nanotechnology
Proc. Eurocorr 2005, Lissabon (2005), Paper 186

W. Fürbeth, H.Q. Nguyen. M. Schütze
Nanopartikelbasierte Korrosionsschutzschichten für Leichtmetalle
Tagungsband Thüringer Grenz- und Oberflächentage, Innovent e.V., Jena (2005) 127-132

S. Benfer, W. Fürbeth, M. Schütze
Entwicklung von nanopartikelbasierten Schichten für die Emailreparatur
Tagungsband 6. Industriefachtagung Oberflächen- und Wärmebehandlungstechnik & 8. Werkstofftechnisches Kolloquium, Chemnitz (2005)

W. Fürbeth, M. Schütze
Novel corrosion protective coatings based on nanomaterials
Report Nato-RTO Specialist Meeting AVT-122 Nanomaterials Technology for Military Vehicle Structural Applications, Granada (2005), Paper No. 8

2004

W. Fürbeth, U. Harm, K. Jüttner, K.-M. Mangold, H.Q. Nguyen, M. Schütze
New developments for corrosion resistant coatings on the sub-micron scale
GDCh-Monographie Bd. 29 , Elektrochemie und Materialforschung, Hrsg. K. Jüttner, J. Russow, GDCh, Frankfurt am Main (2004) 145-153

U. Harm, W. Fürbeth, K.-M. Mangold, K. Jüttner
Neuartiges Primersystem für Eisen und Stahl mit Self-Assembled Monolayers (SAM) und leitfähigen Polymeren
Jahrbuch Oberflächentechnik 2004, Bd. 60 , Hrsg. R. Suchentrunk, Eugen G. Leuze Verlag, Bad Saulgau (2004) 155-160

W. Fürbeth, H.Q. Nguyen, M. Schütze
Neuartige Korrosionsschutzschichten für Leichtmetalle auf der Basis chemischer Nanotechnologie
Berichtsband Nr. 57 der Deutschen Forschungsgesellschaft für Oberflächenbehandlung, Leichtmetall-Anwendungen - Neue Entwicklungen in der Oberflächentechnik, DFO e.V., Düsseldorf (2004)

W. Fürbeth, H.Q. Nguyen, M. Schütze
Neue Korrosionsschutzschichten für Metalle auf der Basis chemischer Nanotechnologie
Metalloberfläche 58 (2004) 31-36

M. Schütze, H.Q. Nguyen, W. Fürbeth
Korrosionsschutzschichten auf Nanopartikel-Basis
Tagungsband 5. Wörlitzer Workshop Funktionelle Schichten, EFDS, Dresden (2004)

W. Fürbeth, U. Harm, K.-M. Mangold, K. Jüttner
Novel protective coatings based on a combination of self-assembled monolayers and conducting polymers
Proc. EUROCORR 2004, Nizza (2004)

U. Harm, W. Fürbeth, K.-M. Mangold, K. Jüttner
Neuartiger Korrosionsschutz durch self-assembled Monolayers (SAM) aus derivatisierten leitfähigen Polymeren
GDCh-Monographie Bd. 29 , Elektrochemie und Materialforschung, Hrsg. K. Jüttner, J. Russow, GDCh, Frankfurt am Main (2004) 208

2003

E. Juzeliunas, K.Leinartas, W. Fürbeth, K. Jüttner
Study of initial stages of Al-Mg alloy corrosion in water, chloride and Cu(II) environment by a scanning Kelvinprobe
Corrosion Science 45 (2003)1939-1950

E. Juzeliunas, A. Sudavicius, K. Jüttner, W. Fürbeth
Study of initial stages of Al-Mg alloy corrosion in water, chloride and Cu(II) environment by a scanning Kelvinprobe and XPS
Electrochem. Comm. 5 (2003) 154-158

W. Fürbeth, U. Harm, K.-M. Mangold, K. Jüttner
Novel protective coatings for steel based on a combination of self-assembled monolayers and conducting polymers
Proc. on CD-ROM EUROCORR 2003, Budapest (2003)

W. Fürbeth, H.Q. Nguyen, M. Schütze
Nanopulver-Schichten als Korrosionsschutz für Leichtmetallegierungen
Tagungsband 1. KKF-Kolloquium "Gemeinsame Forschung im Korrosionsschutz - Problemlösungen für den metallischen Leichtbau", January 2003, GfKORR e.V., Frankfurt am Main (2003)

W. Fürbeth, H.Q. Nguyen, M. Schütze
Nanoenamel - new technologies for functional coatings
ACHEMA-Magazine/ Special edition of Process, Vogel Verlag, März 2003, 74-75

W. Fürbeth, H.Q. Nguyen. M. Schütze
Development of new corrosion resistant coatings based on chemical nanotechnology
Proc. on CD-ROM Int. Symposium "Corrosion Science in the 21st century", UMIST, Manchester, Juli 2003,
The Journal of Corrosion Science and Engineering 6 (2003) Paper H014

W. Fürbeth, H.Q. Nguyen, M. Schütze
Neue Korrosionsschutzschichten für Metalle auf der Basis chemischer Nanotechnologie
Proc. Oberflächentage 2003, DGO, Düsseldorf (2003)

2002

W. Fürbeth, U. Harm, K.-M. Mangold, H.-Q. Nguyen, K. Jüttner, M. Schütze
Modern developments for corrosion resistant coatings on the sub-micron scale
Proc. on CD-ROM 15th Int. Corrosion Congress, Granada (2002) paper 203

U. Harm, W. Fürbeth, K.-M. Mangold, K. Jüttner
Novel protective coatings for steel based on a combination of self-assembled monolayers and conducting polymers
Macromolecular Symposia 187 (2002) 65-76

H.-Q. Nguyen, W. Fürbeth, M. Schütze
Nano-enamel: a new way to produce glass-like protective coatings for metals
Materials and Corrosion 53 (2002) 772-782

2001

W. Fürbeth, K. Jüttner
Application of the Scanning Kelvinprobe for investigating the delamination stability of primers for rubber lining
VGB PowerTech 81/10 (2001) 108-112

W. Fürbeth, M. Stratmann
The delamination of polymeric coatings from electrogalvanized steel - A mechanistic approach - Part 1: Delamination from a defect with intact zinc layer
Corrosion Science 43 (2001) 207-227

W. Fürbeth, M. Stratmann
The delamination of polymeric coatings from electrogalvanized steel - A mechanistic approach - Part 2: Delamination from a defect down to steel
Corrosion Science 43 (2001) 229-241

W. Fürbeth, M. Stratmann
The delamination of polymeric coatings from electrogalvanized steel - A mechanistic approach - Part 3: Delamination kinetics and influence of CO₂
Corrosion Science 43 (2001) 243-254

W. Fürbeth, H.Q. Nguyen, F. Dettenwanger, M. Schütze
New developments for corrosion resistant coatings for light metals and steel based on chemical nanotechnology
Proc. on CD-ROM of EUROCORR 2001, Riva del Garda, Oktober 2001, AIM, Milano, Italien (2001), Paper No. 14

2000

W. Fürbeth, K. Jüttner
The scanning Kelvinprobe for the investigation of corrosion mechanisms
In: Proc. 3rd Kurt Schwabe Corrosion Symposium, Zakopane, Poland (2000)

W. Fürbeth, K. Jüttner, M. Schütze
Development of new corrosion resistant coatings using modern electrochemical techniques
In: Proc. 51st Annual ISE Meeting, Warschau, Poland (2000) paper No. 67

W. Fürbeth, H.-Q. Nguyen, F. Dettenwanger, M. Schütze
Development of new corrosion resistant coatings for light metals by sintering of nanopowders
In: Proc. CD-ROM EUROCORR 2000, London, UK (2000) paper No. C014/107

W. Fürbeth, M. Stratmann
Scanning Kelvinprobe investigations on the delamination of polymeric coatings from electrogalvanized steel
Prog. Org. Coat. 39 (2000) 23-29

U. Eul, E. Heitz, J. Zosel, H. Kaden
Korrosionsmonitoring mit Hilfe der elektrochemischen Einfach- und Mehrfachsensorik
Chem. Technik 52 (2000) 144-151

1999

W. Fürbeth, K. Jüttner
Investigations on the stability of coating systems for heavy duty corrosion protection
In: Solution of corrosion problems in advanced technologies, ed. by G. Schmitt and M. Schütze, Chapter 13/25, DECHEMA, Frankfurt am Main (1999)

2024-05-08 - 2024-05-08 , Online Seminar

Basics of the Nagoya Protocol: From Policy to Practice
more courses

Publications Materials and Corrosion Protection prior to 2011

High Temperature Materials

Scientific Publications

Corrosion and Creep/LCF

Mechanical Properties of Oxide Scales

Ni-Base Alloys and Coatings for Gas Turbines

Thermal Barrier Coatings

Diffusion Coatings

Coatings for Thermal Power Plants

Materials and Coatings for sulphidizing Atmospheres

Materials and Coatings for Carburizing Conditions and Metal Dusting Atmospheres

Materials and Coatings for Halogen-containing Atmospheres

Titanium Aluminides and other Ti Alloys

Silicides and Si-based Ceramics

Materials in Water Vapour-Containing Atmospheres

Heat-resisting Steels

Investigation Methods

Corrosion and Corrosion Protection in Liquid Media

Role of Microstructure

Mechanical High Temperature Properties Without Corrosion

Nanotechnology

Review Articles

Books

General Press Releases

Korrosion

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

Upcoming courses

DECHEMA