Realization of Ultrasound Enhanced Friction Stir Welded Al/Mg- and Al/Steel-Joints: Process and Robustness, Mechanical and Corrosion Properties

Marco Thomä, Guntram Wagner, Benjamin Straß, Christian Conrad, Bernd Wolter, Sigrid Benfer, Wolfram Fürbeth

Chapter Friction Stir Welding and Processing IX, Part of the series The Minerals, Metals & Materials Series pp 179-194; DOI 10.1007/978-3-319-52383-5_19

Abstract

As an innovative hybrid joining process ultrasound enhanced friction stir welding (USE-FSW) was successfully applied on Al/Mg-joints and offers a beneficial impact on the resulting microstructure and mechanical properties. Whereas in conventional FSW of Al to Mg continuous band-shaped intermetallic layers of Al3Mg2 and Mg17Al12 are always present, the formation of these layers can be influenced positively by the ultrasound energy that is transferred into the stirred zone in USE-FSW. In this case, the intermetallic phases are spread over the complete nugget zone. Consequently, the tensile strength increases about 25% and the fatigue strength rises by up to 3.5 times. Based on this USE-FSW was investigated with regard to possible advantages for Al/steel-hybrid-joints. Preliminary investigations have shown significant differences in the microstructure of ultrasound enhanced and non-ultrasound enhanced EN AW-6061/DC04-joints. While conventional FSW led to hooks and larger particles of steel in the aluminum, USE-FSW-joints show remarkably smaller and more homogenous distributed steel particles in the nugget. Beside mechanical investigations, non-destructive examinations and corrosion tests were carried out.

back
Become a benefactor